Damage modeling of a transversely loaded titanium matrix composite under cyclic conditions

被引:0
|
作者
Neu, RW [1 ]
Patel, AM [1 ]
机构
[1] Georgia Inst Technol, George W Woodruff Sch Mech Engn, Atlanta, GA 30332 USA
来源
JOURNAL OF COMPOSITES TECHNOLOGY & RESEARCH | 1999年 / 21卷 / 02期
关键词
titanium matrix composites; transverse loading; fatigue; residual strength; damage mechanics;
D O I
暂无
中图分类号
TB33 [复合材料];
学科分类号
摘要
The life-limiting loading configuration of weakly bonded unidirectional titanium matrix composites is often transverse cyclic loading. Most fatigue tests under this loading configuration have been conducted at maximum stress levels above the monotonic proportional limit. However, the fatigue behavior at maximum stress levels below the monotonic proportional limit is often of interest, yet little work has been performed to identify this region on the fatigue life diagram. This investigation examined the behavior of a 16-ply SCS-9/Timetal 21S composite loaded transversely under generally low amplitude fatigue conditions. The fatigue limit under this loading configuration was found to be about one half the proportional limit. Residual strength tests were then conducted to determine the state of damage through measuring the change in stiffness using a number of unloading and reloading events. A damage mechanics methodology was demonstrated as a means to quantify the effects of the fatigue damage on the mechanical performance.
引用
收藏
页码:75 / 83
页数:9
相关论文
共 50 条
  • [1] Damage modeling of oxide/oxide ceramic matrix composites under cyclic loading conditions
    Liu, Hui
    Yuan, Huang
    Yang, Zhengmao
    CERAMICS INTERNATIONAL, 2020, 46 (15) : 23379 - 23389
  • [2] Hierarchical modeling of deformation and damage of metal matrix composite under uniaxial loading conditions
    Smirnov, S. V.
    Konovalov, A. V.
    Myasnikova, M. V.
    Khalevitsky, Yu V.
    Smirnov, A. S.
    WINTER SCHOOL ON CONTINUOUS MEDIA MECHANICS, 2017, 208
  • [3] Modeling transversely loaded metal-matrix composites
    Naboulsi, S
    JOURNAL OF COMPOSITE MATERIALS, 2003, 37 (01) : 55 - 72
  • [4] Numerical Investigation of Fracture in a Transversely Loaded Metal Matrix Composite
    Papakaiatakis, G.
    Karaekas, D.
    COMPUTATIONAL METHODS IN SCIENCE AND ENGINEERING, VOL 2: ADVANCES IN COMPUTATIONAL SCIENCE, 2009, 1148 : 169 - +
  • [5] Cyclic behavior of transverse loaded titanium matrix composites
    Hausmann, JM
    Emura, S
    Leyens, C
    AFFORDABLE METAL MATRIX COMPOSITES FOR HIGH-PERFORMANCE APPLICATIONS II, 2003, : 61 - 70
  • [6] Micromechanical damage modeling of fiber/matrix interface under cyclic loading
    Shi, ZF
    Chen, YH
    Zhou, LM
    COMPOSITES SCIENCE AND TECHNOLOGY, 2005, 65 (7-8) : 1203 - 1210
  • [7] Creep-induced matrix damage in transversely loaded unidirectionally reinforced composites
    Selvadurai, APS
    DAMAGE AND FRACTURE MECHANICS: COMPUTER AIDED ASSESSMENT AND CONTROL, 1998, : 441 - 449
  • [8] Transverse cyclic behaviour of a unidirectional titanium based metal matrix composite in isothermal and thermomechanical conditions
    Legrand, N
    Grison, J
    Remy, L
    MECHANICS AND MATERIAL ENGINEERING FOR SCIENCE AND EXPERIMENTS, 2001, : 85 - 89
  • [9] On transverse matrix cracking in composite laminates loaded in flexure under transient hygrothermal conditions
    Khodjet-Kesba, M.
    Benkhedda, A.
    Bedia, E. A. Adda
    Boukert, B.
    STRUCTURAL ENGINEERING AND MECHANICS, 2018, 67 (02) : 165 - 173
  • [10] Modeling of fatigue damage in a polymer matrix composite
    Sun, Z
    Daniel, IM
    Luo, JJ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 361 (1-2): : 302 - 311