3D printing of carbon fibre-reinforced plastic parts

被引：117

作者：

Nakagawa, Yuki ^{[1
]}

Mori, Ken-ichiro ^{[1
]}

Maeno, Tomoyoshi ^{[2
]}

机构：

[1] Toyohashi Univ Technol, Dept Mech Engn, Toyohashi, Aichi 4418580, Japan

[2] Yokohama Natl Univ, Div Mat Sci & Chem Engn, Fac Engn, Yokohama, Kanagawa 2408501, Japan

来源：

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2017年 / 91卷 / 5-8期

关键词：

3D printing; CFRP; Thermal bonding; Microwave oven; SHEET;

D O I：

10.1007/s00170-016-9891-7

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Carbon fibre-reinforced plastic parts were manufactured by sandwiching carbon fibres between upper and lower ABS layers made by a 3D printer using fused deposition modelling. Carbon fibre-reinforced plastic tensile specimens were manufactured, and the strength of the specimens was measured. The strength is not increased only by sandwiching of the carbon fibres, and thermal bonding between the fibres and layers is required. The strength for the small diameter of the nozzle is higher than that for the large diameter. The thermal bonding operation is simplified by using a microwave oven.

引用

收藏

页码：2811 / 2817

页数：7

相关论文

共 13 条

[1] Effects of microwave assisted heating of carbon nanofiber reinforced high density polyethylene [J].

Benitez, R. ;

Fuentes, A. ;

Lozano, K. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 190 (1-3) :324-331

[2] Forming studies of carbon fibre composite sheets in dome forming processes [J].

Davey, S. ;

Das, R. ;

Cantwell, W. J. ;

Kalyanasundaram, S. .

COMPOSITE STRUCTURES, 2013, 97 :310-316

[3] Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers [J].

Fu, SY ;

Lauke, B .

COMPOSITES SCIENCE AND TECHNOLOGY, 1996, 56 (10) :1179-1190

[4] Isothermal forming of CFRTP sheet by penetration of hemispherical punch [J].

Isogawa, Sachihiro ;

Aoki, Hidenori ;

Tejima, Masahiro .

11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 :1620-1626

[5] Composites by rapid prototyping technology [J].

Kumar, S. ;

Kruth, J. -P. .

MATERIALS & DESIGN, 2010, 31 (02) :850-856

[6] Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation [J].

Matsuzaki, Ryosuke ;

Ueda, Masahito ;

Namiki, Masaki ;

Jeong, Tae-Kun ;

Asahara, Hirosuke ;

Horiguchi, Keisuke ;

Nakamura, Taishi ;

Todoroki, Akira ;

Hirano, Yoshiyasu .

SCIENTIFIC REPORTS, 2016, 6

[7] EFFECTS OF FIBER LENGTH ON TENSILE-STRENGTH OF CARBON GLASS-FIBER HYBRID COMPOSITES [J].

MIWA, M ;

HORIBA, N .

JOURNAL OF MATERIALS SCIENCE, 1994, 29 (04) :973-977

[8] Drapability of dry textile fabrics for stampable thermoplastic preforms [J].

Rozant, O ;

Bourban, PE ;

Månson, JAE .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2000, 31 (11) :1167-1177

[9] Suppression of thermal degradation for interface between carbon fiber and resin matrix in carbon fiber reinforced thermoplastic using hexagonal boron nitride [J].

Shimamoto, Daisuke ;

Imai, Yusuke ;

Hotta, Yuji .

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2014, 122 (1428) :732-735

[10] Nanofiber-reinforced polymers prepared by fused deposition modeling [J].

Shofner, ML ;

Lozano, K ;

Rodríguez-Macías, FJ ;

Barrera, EV .

JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 89 (11) :3081-3090