Effects of mechanical properties and layer structure on the cyclic dynamic loading of TiN-based coatings

被引：43

作者：

Chen, Jian ^{[1
]}

Ji, Ran ^{[1
]}

Khan, Raja H. U. ^{[1
]}

Li, Xiaoying ^{[1
]}

Beake, Ben D. ^{[2
]}

Dong, Hanshan ^{[1
,2
]}

机构：

[1] Univ Birmingham, Sch Met & Mat, Birmingham B15 2TT, W Midlands, England

[2] Micro Mat Ltd, Wrexham LL13 7YL, Wales

来源：

SURFACE & COATINGS TECHNOLOGY | 2011年 / 206卷 / 2-3期

关键词：

TiAlSiN; Nano-impact; Focused ion beam; Nanoindentation; WEAR-RESISTANT COATINGS; HARD THIN-FILMS; SI-N COATINGS; IMPACT-WEAR; TRIBOLOGICAL BEHAVIOR; INDENTATION FRACTURE; EROSION RESISTANCE; CUTTING TOOLS; PVD-COATINGS; SINGLE;

D O I：

10.1016/j.surfcoat.2011.07.079

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The cyclic dynamic loading behaviour of a multilayer TiAlSiN coating on M2 steel was systematically investigated using repetitive nano-impact over a wide range of impact load. Its behaviour was compared with a monolayer TIN on the same substrate. When the load was increased to 10 mN and 30 mN for the TiN and TiAlSiN coatings, respectively, cracks started to appear during the tests demonstrated as depth steps in the impact depth curves. The improved crack resistance of TiAlSiN coating is consistent with its higher H/E-r and H-3/E-r(2) measured by nanoindentation. The impact footprints were studied from both top-view and cross-sectional view using a focused ion beam microscope and SEM. Spallation was observed in both coatings at higher impact loads. TiAlSiN coating shows much less spallation due to its multilayer structure. The cross-sectional study discovered that the cracks were initiated within the coating. A simple model has been used to study the power law relationship between the impact volume loss and the impact velocity. (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：522 / 529

页数：8

共 45 条

[31] Advantages of Nanoimpact Fracture Testing in Studying the Mechanical Behavior of CrAl(Si)N Coatings
Mosquera, A.
Mera, L.
Fox-Rabinovich, G. S.
Martinez, R.
Azkona, I.
Endrino, J. L.
[J]. NANOSCIENCE AND NANOTECHNOLOGY LETTERS, 2010, 2 (04) : 352 - 356
[32] Toughness of hard nanostructured ceramic thin films
Musil, J.
Jirout, M.
[J]. SURFACE & COATINGS TECHNOLOGY, 2007, 201 (9-11) : 5148 - 5152
[33] On the behaviour of indentation fracture in TiAlSiN hard thin films
Nakonechna, O
Cselle, T
Morstein, M
Karimi, A
[J]. THIN SOLID FILMS, 2004, 447 : 406 - 412
[34] AN IMPROVED TECHNIQUE FOR DETERMINING HARDNESS AND ELASTIC-MODULUS USING LOAD AND DISPLACEMENT SENSING INDENTATION EXPERIMENTS
OLIVER, WC
PHARR, GM
[J]. JOURNAL OF MATERIALS RESEARCH, 1992, 7 (06) : 1564 - 1583
[35] Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review
PalDey, S
Deevi, SC
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 342 (1-2): : 58 - 79
[36] Conventional and high resolution TEM investigation of the microstructure of compositionally graded TiAlSiN thin films
Parlinska-Wojtan, M
Karimi, A
Cselle, T
Morstein, M
[J]. SURFACE & COATINGS TECHNOLOGY, 2004, 177 : 376 - 381
[37] REACTIVE-SPUTTER-DEPOSITED TIN FILMS ON GLASS SUBSTRATES
PELLEG, J
ZEVIN, LZ
LUNGO, S
CROITORU, N
[J]. THIN SOLID FILMS, 1991, 197 (1-2) : 117 - 128
[38] A new class of high performance PVD coatings for carbide cutting tools
Prengel, HG
Jindal, PC
Wendt, KH
Santhanam, AT
Hegde, PL
Penich, RM
[J]. SURFACE & COATINGS TECHNOLOGY, 2001, 139 (01) : 25 - 34
[39] Structure and properties of Al-Ti-Si-N coatings prepared by the cathodic arc ion plating method for high speed cutting applications
Tanaka, Y
Ichimiya, N
Onishi, Y
Yamada, Y
[J]. SURFACE & COATINGS TECHNOLOGY, 2001, 146 : 215 - 221
[40] The effect of the addition of Al and Si on the physical and mechanical properties of titanium nitride
Vaz, F
Rebouta, L
Andritschky, M
da Silva, MF
Soares, JC
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 93 : 169 - 176

← 1 2 3 4 5 →