Effect of Al-Si alloy powder on properties of corundum-mullite composites

被引：0
|
作者：
Zhang Zhihui [1 ]
Fu Zhiwei [1 ]
Ruan Guozhi [1 ]
机构：
[1] Shandong Univ Sci & Technol, Sch Mat Sci & Engn, Qingdao 266510, Peoples R China
来源：
RARE METALS | 2011年 / 30卷
关键词：
corundum; mullite; sintering; densification; Al-Si alloy; SILLIMANITE BEACH SAND; MECHANICAL-PROPERTIES; REFRACTORY MATERIALS; ALUMINA; BEHAVIOR; ZRO2;
D O I：
10.1007/s12598-011-0335-0
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
By means of transient plastic phase process, the corundum-mullite composites were produced using tabular corundum, fused mullite, SiO2 micro powder and Al-Si alloy powder as raw material. The effect of Al-Si alloy powder addition on the sintering, mechanical strength, thermal shock resistance, phase composition and microstructure of the specimens treated at 1550 degrees C for 3 h in an air atmosphere were studied by XRD and SEM analyses. The results indicate that Al-Si alloy powder can lead to plastic shaping in corundum-mullite materials. At the same time, additive of Al-Si alloy powder can greatly improve the sintering, mechanical strength and thermal shock resistance of corundum-mullite composites. This is because that Al-Si alloy powder can melt, oxidize in sintering. The new oxide can react with the matrix to mullite and the in-situ mullite crystals are needle-like that can interleave with others.
引用
收藏
页码：511 / 514
页数：4
相关论文
共 50 条
  • [41] Effect of isothermal extrusion parameters on mechanical properties of Al-Si eutectic alloy
    Deng, Lei
    Wang, Xinyun
    Xia, Juchen
    Li, Jianjun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (21): : 6504 - 6509
  • [42] Effect of thixocasting and heat treatment on the tribological properties of hypoeutectic Al-Si alloy
    Vencl, A.
    Bobic, I.
    Miskovic, Z.
    WEAR, 2008, 264 (7-8) : 616 - 623
  • [43] Effect of Squeeze Casting on Microstructure and Wear Properties of Aluminium Al-Si Alloy
    Tamuly, Reeturaj
    Behl, Amit
    Borkar, Hemant
    ADVANCES IN LIGHTWEIGHT MATERIALS AND STRUCTURES, ACALMS 2020, 2020, 8 : 705 - 714
  • [44] Mullite-Corundum Composites from Bauxite: Effect of Chemical Composition
    Maldhure, Atul V.
    Tripathi, H. S.
    Ghosh, A.
    Das, S. K.
    TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY, 2014, 73 (01) : 31 - 36
  • [45] Effect of spark plasma sintering temperature on microstructure and mechanical properties of mullite - WC composites
    Rajaei, H.
    Farvizi, M.
    Mobasherpour, I.
    Zakeri, M.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2018, 70 : 197 - 201
  • [46] Microstructure and mechanical properties of Al-Si alloy modified with Al-3P
    Peng, Hao-ping
    Li, Zhi-wei
    Zhu, Jia-qing
    Su, Xu-ping
    Liu, Ya
    Wu, Chang-jun
    Wang, Jian-hua
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2020, 30 (03) : 595 - 602
  • [47] The Effect of Cooling Rate on Properties of Intermetallic Phase in a Complex Al-Si Alloy
    Tupaj, M.
    Orlowicz, A. W.
    Mroz, M.
    Trytek, A.
    Markowska, O.
    ARCHIVES OF FOUNDRY ENGINEERING, 2016, 16 (03) : 125 - 128
  • [48] A novel modifier on eutectic Si and mechanical properties of Al-Si alloy
    Jiang, Bo
    Ji, Zesheng
    Hu, Maoliang
    Xu, Hongyu
    Xu, Song
    MATERIALS LETTERS, 2019, 239 : 13 - 16
  • [49] Sliding wear behaviour of Al-Si alloy-fly ash composites produced by powder metallurgy technique
    Jailani, H. Siddhi
    Rajadurai, A.
    Mohan, B.
    Sornakumar, T.
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2017, 69 (02) : 241 - 247
  • [50] Effect of Si content on surface hardening of Al-Si alloy by shot peening treatment
    Cho, K. T.
    Yoo, S.
    Lim, K. M.
    Kim, H. S.
    Lee, W. B.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 : S265 - S270
12345