THE INFLUENCE OF MATERIAL PROPERTIES AND CRACK LENGTH ON THE Q-STRESS VALUE NEAR THE CRACK TIP FOR ELASTIC-PLASTIC MATERIALS FOR CENTRALLY CRACKED PLATE IN TENSION

被引:0
作者
Graba, Marcin [1 ]
机构
[1] Kielce Univ Technol, Fac Mechatron & Machine Design, Kielce, Poland
关键词
fracture mechanics; cracks; Q-stress; stress fields; HRR solution; FEM; J-integral; O'Dowd theory; MATERIAL CONSTRAINT PARAMETERS; STRUCTURAL COMPONENTS; TRIAXIALITY PARAMETER; SHALLOW DEFECTS; FIELDS; FAMILY;
D O I
暂无
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
In the paper, values of the Q-stress determined for various elastic-plastic materials for centre cracked plate in tension (CC(T)) are presented. The influence of the yield strength, the work-hardening exponent and the crack length on the Q-parameter was tested. The numerical results were approximated by closed form formulas. This paper is a continuation of the catalogue of the numerical solutions presented in 2008, which presents Q-stress solutions for single edge notch specimens in bending - SEN(B). Both papers present full numerical results and their approximation for two basic specimens which are used to determine in the laboratory tests the fracture toughness - J-integral, and both specimens are proposed by FITNET procedure used to idealize the real components.
引用
收藏
页码:23 / 46
页数:24
相关论文
共 21 条
  • [1] ADINA, 2006, 062 ARD INC, VI
  • [2] ADINA, 2006, 067 ARD INC, VI
  • [3] AINSWORTH R.A., 1994, ASME PRESS VESS PIP, V287
  • [4] [Anonymous], 1992, SHALLOW CRACK FRACTU
  • [5] Galkiewicz J., 2006, Journal of Theoretical and Applied Mechanics, V44, P19
  • [6] Graba M, 2008, J THEOR APP MECH-POL, V46, P269
  • [8] Kocak M., 2006, FITNET REPORT EUROPE
  • [9] Kumar V., 1982, Engineering approach for elastic-plastic fracture analysis
  • [10] Li Y., 1985, SCI SINICA A, VXXIX, P941