Shear decohesion of clamped abraded steel interfaces reinforced with epoxy adhesive

被引:19
作者
Oinonen, A. [1 ]
Marquis, G. [1 ]
机构
[1] Aalto Univ, Sch Sci & Technol, Dept Appl Mech, FIN-00076 Espoo, Finland
关键词
Cohesion; Epoxides; Fracture; R-curves; Surface roughness; ANAEROBIC ADHESIVES; SURFACE-ROUGHNESS; STATIC STRENGTH; JOINTS; FRACTURE; CRACKS;
D O I
10.1016/j.ijadhadh.2011.05.002
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
This paper presents an experimental assessment of quasi-static shear strength of the combined mechanically clamped and epoxy adhesive reinforced steel interfaces. The effect of the surface roughness and clamping load on the combined interfacial decohesion and slipping is investigated. The maximum shear strength of the adhesive reinforced specimens with fine ground, coarse ground and grit blasted contact surface finishes is reported with comparison to the results of the identical non-reinforced specimens. Results have been assessed both in terms of calculated fracture energy and interface decohesion. The bonded interfaces with grit blasted finish showed considerably higher maximum shear stresses as compared to the identical ground cases. The shear strength contributions of strong clamping and reinforcing conformed well to the principle of superposition for all experimented interface types. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:550 / 558
页数:9
相关论文
共 26 条
[21]   A PATH INDEPENDENT INTEGRAL AND APPROXIMATE ANALYSIS OF STRAIN CONCENTRATION BY NOTCHES AND CRACKS [J].
RICE, JR .
JOURNAL OF APPLIED MECHANICS, 1968, 35 (02) :379-+
[22]   Stress analysis and strength evaluation of bonded shrink fitted joints subjected to torsional loads [J].
Sawa, T ;
Yoneno, M ;
Motegi, Y .
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2001, 15 (01) :23-42
[23]   Effect of surface roughness on the strength of cleavage joints [J].
Shahid, M ;
Hashim, SA .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2002, 22 (03) :235-244
[24]   The cohesive mechanical properties of a toughened epoxy adhesive as a function of cure level [J].
Stewart, I. ;
Chambers, A. ;
Gordon, T. .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2007, 27 (04) :277-287
[25]   Bonding strength of adhesives and surface roughness of joined parts [J].
Uehara, K ;
Sakurai, M .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 127 (02) :178-181
[26]   A damage-mechanics-based approach for modelling decohesion in adhesively bonded assemblies [J].
Valoroso, Nunziante ;
Champaney, Laurent .
ENGINEERING FRACTURE MECHANICS, 2006, 73 (18) :2774-2801