A simple rotor current estimation method for predictive control of multi-phase drives

被引:3
|
作者
Satue, Manuel G. [1 ]
Arahal, Manuel R. [1 ]
Ortega, Manuel G. [1 ]
Ramirez, Daniel R. [1 ]
机构
[1] Univ Seville, Dept Ingn Sistemas & Automat, Camino Descubrimientos S-N, Seville 41092, Spain
关键词
estimation; model predictive control; multi-phase systems; rotating electric machines; DUAL 3-PHASE PMSM; INDUCTION-MOTOR; FCS-MPC; MODEL; SENSITIVITY;
D O I
10.1002/cta.3394
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Predictive control of stator currents is a model-based technique needing an estimation of rotor currents, which are normally not measured. These currents affect the evolution of the stator currents and, therefore, also affect the predictions used by the controller. The usual procedure consists in correcting their effect by a simple feedback technique. In this article, the estimation of rotor currents is tackled based in the induction machine equivalent circuit. The proposed estimation procedure aims at improving the predictions with respect to the usual procedure. Simulation and experimental results are provided for the particularly demanding case of a multi-phase induction machine, showing the superiority of the proposal.
引用
收藏
页码:4478 / 4491
页数:14
相关论文
共 50 条
  • [1] Rotor Current Estimation in Predictive Control of Multi-phase Drives
    Satué M.G.
    Arahal M.R.
    Ramírez D.R.
    RIAI - Revista Iberoamericana de Automatica e Informatica Industrial, 2023, 20 (01): : 25 - 31
  • [2] Variable Switching Point Predictive Current Control for Multi-Phase Permanent Magnet Synchronous Drives
    Hoerner, Michael
    Wendel, Sebastian
    Dietz, Armin
    Karamanakos, Petros
    Kennel, Ralph
    6TH IEEE INTERNATIONAL CONFERENCE ON PREDICTIVE CONTROL OF ELECTRICAL DRIVES AND POWER ELECTRONICS (PRECEDE 2021), 2021, : 184 - 189
  • [3] A Improved Current Mode Multi-phase Interleaving Control Method
    Wu, Qiong
    Hu, Yue
    Liu, Weixing
    Cheng, Shuang
    Wang, Gang
    Liu, Mingming
    2018 IEEE INTERNATIONAL TELECOMMUNICATIONS ENERGY CONFERENCE (INTELEC), 2018,
  • [4] Multi-phase Induction Machine Speed Estimation Method Using Rotor Slot Harmonics
    Isakov, Ivana
    Vasic, Veran
    Jerkan, Dejan
    Reljic, Dejan
    Todorovic, Ivan
    PROCEEDINGS OF 18TH INTERNATIONAL CONFERENCE ON SMART TECHNOLOGIES (IEEE EUROCON 2019), 2019,
  • [5] Multi-phase current control using finite-state model-predictive control
    Arahal, M. R.
    Barrero, F.
    Toral, S.
    Duran, M.
    Gregor, R.
    CONTROL ENGINEERING PRACTICE, 2009, 17 (05) : 579 - 587
  • [6] Phase current unbalance estimation in multi-phase buck converters
    Eirea, Gabriel
    Sanders, Seth R.
    2006 IEEE POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1-7, 2006, : 1454 - +
  • [7] Trade-offs analysis in predictive current control of multi-phase induction machines
    Arahal, Manuel R.
    Barrero, Federico
    Duran, Mario J.
    Ortega, Manuel G.
    Martin, Cristina
    CONTROL ENGINEERING PRACTICE, 2018, 81 : 105 - 113
  • [8] A Compensation Method for Sequential Current Sampling in Multi-Phase AC Motor Control
    Chen, Zhiqian
    Zhang, Qiao
    2014 17TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2014, : 2716 - 2721
  • [9] Multilevel multi-phase propulsion drives
    Lu, S
    Corzine, K
    2005 IEEE Electric Ship Technologies Symposium, 2005, : 363 - 370
  • [10] The control method for the multi-phase traffic model
    Liu, Yi
    Cheng, Rong-Jun
    Ma, Yan-Qiang
    Ge, Hong-Xia
    INTERNATIONAL JOURNAL OF MODERN PHYSICS C, 2016, 27 (10):