Tribocorrosion behaviour of low temperature plasma carburised 316L stainless steel in 0.5 M NaCl solution

被引：60

作者：

Sun, Y. ^{[1
]}

Haruman, E. ^{[2
]}

机构：

[1] De Montfort Univ, Dept Engn, Fac Technol, Leicester LE1 9BH, Leics, England

[2] Bakrie Univ, Fac Ind Engn, Jakarta 12920, Indonesia

来源：

CORROSION SCIENCE | 2011年 / 53卷 / 12期

关键词：

Stainless steel; Potentiostatic; Carburisation; Pitting corrosion; S-PHASE; MICROSTRUCTURAL CHARACTERIZATION; EROSION-CORROSION; WEAR; DEPASSIVATION; CONTACTS; NITROGEN; ACID;

D O I：

10.1016/j.corsci.2011.08.021

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Experiments have been carried out to study the tribocorrosion behaviour of low temperature plasma carburised 316L stainless steel under unidirectional sliding in 0.5 M NaCl solution, using a pin-on-disk tribometer integrated with a potentiostat for electrochemical control. It is found that the carburised layer exhibits much better resistance to material removal than the untreated specimen, particularly at anodic potentials. No corrosion pits are observed inside the wear track on the carburised specimen at anodic potentials as high as 750 mV (SCE). The results are discussed in terms of the relative contribution of wear and corrosion to overall material removal by tribocorrosion. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：4131 / 4140

页数：10

共 50 条

[1] Corrosion behaviour of low temperature plasma carburised 316L stainless steel in chloride containing solutions
Sun, Y.
CORROSION SCIENCE, 2010, 52 (08) : 2661 - 2670
[2] Tribocorrosion behaviour of AISI 304 stainless steel in 0.5 M NaCl solution
Sun, Y.
Rana, Vipul
MATERIALS CHEMISTRY AND PHYSICS, 2011, 129 (1-2) : 138 - 147
[3] Depth-profiling electrochemical measurements of low temperature plasma carburised 316L stainless steel in 1 M H2SO4 solution
Sun, Y.
SURFACE & COATINGS TECHNOLOGY, 2010, 204 (16-17) : 2789 - 2796
[4] Corrosion Characteristics of Low Temperature Plasma Carburised and Nitrocarburised 316L Stainless Steel in Sulphate-Chloride Solution
Flis-Kabulska, Iwona
Sun, Yong
Flis, Janusz
ZEITSCHRIFT FUR PHYSIKALISCHE CHEMIE-INTERNATIONAL JOURNAL OF RESEARCH IN PHYSICAL CHEMISTRY & CHEMICAL PHYSICS, 2013, 227 (08): : 1105 - 1119
[5] Effect of electrochemical potential on tribocorrosion behavior of low temperature plasma carburized 316L stainless steel in 1 M H2SO4 solution
Sun, Y.
Haruman, E.
SURFACE & COATINGS TECHNOLOGY, 2011, 205 (17-18) : 4280 - 4290
[6] Low-temperature carburised AISI 316L austenitic stainless steel: Wear and corrosion behaviour
Ceschini, L.
Chiavari, C.
Lanzoni, E.
Martini, C.
MATERIALS & DESIGN, 2012, 38 : 154 - 160
[7] Wear maps for low temperature carburised 316L austenitic stainless steel sliding against alumina
O'Donnell, L. J.
Michal, G. M.
Ernst, F.
Kahn, H.
Heuer, A. H.
SURFACE ENGINEERING, 2010, 26 (04) : 284 - 292
[8] Accelerated deterioration mechanism of 316L stainless steel in NaCl solution under the intermittent tribocorrosion process
Liu, Yingrui
Liu, Linlin
Li, Shuyu
Wang, Rujia
Guo, Peng
Wang, Aiying
Ke, Peiling
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2022, 121 : 67 - 79
[9] Tribocorrosion behaviour of DLC-coated 316L stainless steel
Azzi, M.
Paquette, M.
Szpunar, J. A.
Klemberg-Sapieha, J. E.
Martinu, L.
WEAR, 2009, 267 (5-8) : 860 - 866
[10] SURFACE MODIFICATION OF 316L STAINLESS STEEL BY PLASMA-ASSISTED LOW TEMPERATURE CARBURIZING PROCESS
Saravanan, M.
Venkateshwaran, N.
Devaraju, A.
Krishnakumari, A.
Saarvesh, J.
SURFACE REVIEW AND LETTERS, 2017, 24 (08)

← 1 2 3 4 5 →