Monitoring Damage Progression in Tensile Tested SiCp/Al Composites Using Acoustic Emission

被引:4
作者
Wu, Weiguo [1 ]
Wei, Wei [1 ]
Wang, Yanju [2 ]
Sha, Aixue [2 ]
Hao, Wenfeng [3 ]
机构
[1] Jiangsu Univ, Fac Civil Engn & Mech, Zhenjiang, Peoples R China
[2] AECC Beijing Inst Aeronaut Mat, Mat Evaluat Ctr Aeronaut & Aeroengine Applicat, Beijing, Peoples R China
[3] Yangzhou Univ, Coll Mech Engn, Yangzhou, Peoples R China
关键词
SiCp; Al composites; failure mechanism; principal component analysis; acoustic emission; cluster analysis; MECHANISM; BEHAVIOR; MATRIX; SHAFTS;
D O I
10.3389/fmats.2022.918091
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this paper, the tensile tests of SiCp/Al composites were carried out, and the acoustic emission (AE) method was used to monitor the damage progress. The collected signals were analyzed in time-frequency domain. The AE signals were analyzed by principal component analysis (PCA) and fuzzy clustering method (FCM) to characterize the damage mode and failure mechanism of SiCp/Al composites. Three main damage modes of SiCp/Al composites were identified by FCM clustering: SiC/Al interface debonding, Al fracture and SiC particle fracture. After the tensile test, the fracture surface was analyzed by scanning electron microscope (SEM). The results of SEM and energy spectrum analysis confirmed the results of AE. The research results of this paper provide experimental support for the design and engineering application of SiCp/Al composites.
引用
收藏
页数:10
相关论文
共 35 条
[11]   Study on mechanical properties and failure mechanism of 18650 Lithium-ion battery using digital image correlation and acoustic emission [J].
Hao, Wenfeng ;
Yuan, Zengrui ;
Li, Dandan ;
Zhu, Zhenyu ;
Jiang, Shiping .
JOURNAL OF ENERGY STORAGE, 2021, 41
[12]   Acoustic emission characterization of tensile damage in 3D braiding composite shafts [J].
Hao, Wenfeng ;
Huang, Zhen ;
Xu, Yezhuang ;
Zhao, Guoqi ;
Chen, Haosen ;
Fang, Daining .
POLYMER TESTING, 2020, 81
[13]   Damage analysis of cylindrical lithium-ion cells under three-points bending using acoustic emission [J].
Hao, Wenfeng ;
Yuan, Zengrui ;
Xu, Yezhuang ;
Zhu, Shengxin ;
Chen, Haosen ;
Fang, Daining .
JOURNAL OF POWER SOURCES, 2019, 444
[14]   Acoustic emission monitoring of damage progression in 3D braiding composite shafts during torsional tests [J].
Hao, Wenfeng ;
Yuan, Zengrui ;
Tang, Can ;
Zhang, Lu ;
Zhao, Guoqi ;
Luo, Ying .
COMPOSITE STRUCTURES, 2019, 208 :141-149
[15]   The effect of Ni and Zr additions on hardness, elastic modulus and wear performance of Al-SiCp composite [J].
Lattanzi, Lucia ;
Etienne, Andrea ;
Li, Ziyu ;
Chandrashekar, Gnanesh Talur ;
Gonapati, Santosh Reddy ;
Awe, Samuel Ayowole ;
Jarfors, Anders Eric Wollmar .
TRIBOLOGY INTERNATIONAL, 2022, 169
[16]   Effects of SiC particulate size on dynamic compressive properties in 7075-T6 Al-SiCp composites [J].
Lee, Hyungsoo ;
Choi, Jin Hyeok ;
Jo, Min Chul ;
Lee, Donghyun ;
Shin, Sangmin ;
Jo, Ilguk ;
Lee, Sang-Kwan ;
Lee, Sunghak .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 738 :412-419
[17]   A data-driven probabilistic framework towards the in-situ prognostics of fatigue life of composites based on acoustic emission data [J].
Loutas, Theodoros ;
Eleftheroglou, Nick ;
Zarouchas, Dimitrios .
COMPOSITE STRUCTURES, 2017, 161 :522-529
[18]   Finite element analysis and experimental investigation of ultrasonic testing of internal defects in SiCp/Al composites [J].
Lu, Shijin ;
Wang, Xiaohui ;
Teng, Lichen ;
Zhang, Junjie ;
Zhou, Zhenggan ;
Tong, Zhen ;
Shao, Haiyan ;
Men, Xiuhua .
CERAMICS INTERNATIONAL, 2022, 48 (05) :5972-5982
[19]   ACOUSTIC-EMISSION FROM PARTICULATE-REINFORCED METAL-MATRIX COMPOSITES [J].
MUMMERY, PM ;
DERBY, B ;
SCRUBY, CB .
ACTA METALLURGICA ET MATERIALIA, 1993, 41 (05) :1431-1445
[20]   ACOUSTIC-EMISSION MONITORING OF DAMAGE IN METAL-MATRIX COMPOSITES SUBJECTED TO THERMOMECHANICAL FATIGUE [J].
NEU, RW ;
ROMAN, I .
COMPOSITES SCIENCE AND TECHNOLOGY, 1994, 52 (01) :1-8