Modelling of engine in-cylinder thermodynamics under high values of ignition retard

被引:22
|
作者
Chan, SH [1 ]
Zhu, J [1 ]
机构
[1] Nanyang Technol Univ, Sch Mech & Prod Engn, Singapore 2263, Singapore
关键词
engine thermodynamics; high values of ignition retard; modified Wiebe function; mass blowdown;
D O I
10.1016/S1290-0729(00)00274-X
中图分类号
O414.1 [热力学];
学科分类号
摘要
This paper presents the work on a carburetted gasoline engine, in particular the complete modelling of an engine in-cylinder thermodynamics under high values of ignition retard (HVIR). The "combustion" is a two-zone burnt/unburned model with the fuel burning rate described by a Wiebe function. Under extreme spark timing retard conditions, the Wiebe function describing the heat release of the fuel-air reactions was modified to account for the critical change in pressure distribution in the cylinder due to the abnormal spark retard. An empirical correlation for cylinder pressure variation during the mass blowdown process, which occurs between the exhaust valve opened and bottom-dead-centre, was included in the simulation to enhance the predictive capability of the engine model. The complicated mass blowdown process across the exhaust valves was simplified by two processes. (i) isentropic expansion from the cylinder pressure to the constant exhaust manifold pressure, and (ii) constant pressure throttling which gives rise to increased exhaust gas temperature due to the recovery of kinetic energy. (C) 2001 Editions scientifiques et medicales Elsevier SAS.
引用
收藏
页码:94 / 103
页数:10
相关论文
共 50 条
  • [21] Intake and in-cylinder flowfield modelling of a four-valve diesel engine
    Micklow, G. J.
    Gong, W-D
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2007, 221 (D11) : 1425 - 1440
  • [22] In-cylinder fuel behaviour and exhaust emissions during the cold operation of a spark ignition engine
    Shayler, PJ
    Belton, C
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 1999, 213 (D2) : 161 - 174
  • [23] Effects of in-cylinder catalytic coating on the performance of a two-stroke spark ignition engine
    Nedunchezhian, N
    Dhandapani, S
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2001, 8 (01) : 1 - 7
  • [24] Expansion of operating range in a premixed charge compression ignition engine with in-cylinder water injection
    Kaneko, Naoya
    Neko, Yoshihiro
    Ando, Hirokazu
    Ogawa, Hideyuki
    Miyamoto, Noboru
    Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 2002, 68 (665): : 270 - 275
  • [25] In-cylinder thermochemical fuel reforming (TFR) in a spark-ignition natural gas engine
    Zhu, Lei
    He, Zhuoyao
    Xu, Zhen
    Lu, Xingcai
    Fang, Junhua
    Zhang, Wugao
    Huang, Zhen
    PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2017, 36 (03) : 3487 - 3497
  • [26] Quantitative measurements of in-cylinder gas composition in a controlled auto-ignition combustion engine
    Zhao, H.
    Zhang, S.
    MEASUREMENT SCIENCE AND TECHNOLOGY, 2008, 19 (01)
  • [27] Research of the impacts of in-cylinder steam injection and ignition timing on the performance and NO emission of a LPG engine
    Zhang, Zhongbo
    Wan, Weijian
    Zhang, Wencan
    Liu, Qin
    Zhao, Rongchao
    Chen, Youpeng
    Qin, Qichao
    Energy, 2022, 244
  • [28] Research of the impacts of in-cylinder steam injection and ignition timing on the performance and NO emission of a LPG engine
    Zhang, Zhongbo
    Wan, Weijian
    Zhang, Wencan
    Liu, Qin
    Zhao, Rongchao
    Chen, Youpeng
    Qin, Qichao
    ENERGY, 2022, 244
  • [29] An approach for rapid automotive catalyst lightoff by high values of ignition retard
    Zhu, J
    Chan, SH
    JOURNAL OF THE INSTITUTE OF ENERGY, 1996, 69 (480): : 167 - 173
  • [30] In-cylinder gas flow characteristics study of CI engine under motoring and pre-ignition firing conditions using a high-speed PIV
    Aljarf, Saad
    Singh, Hardeep
    Ichiyanagi, Mitsuhisa
    Suzuki, Takashi
    ALEXANDRIA ENGINEERING JOURNAL, 2022, 61 (08) : 6441 - 6455