Porous aggregate strength and its influence on lightweight concrete strength

被引：0

作者：

Adamek, Jiri ^{[1
]}

Jurankova, Vlasta ^{[1
]}

Kucharczykova, Barbara ^{[1
]}

机构：

[1] Brno Univ Technol, Brno 60200, Czech Republic

来源：

9TH INTERNATIONAL CONFERENCE: MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES, VOLS 1-3 | 2008年

关键词：

lightweight concrete; porous aggregate; compressive strength; cohesion; cement hydration; modulus of elasticity;

D O I：

暂无

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The stress strength of structural concrete made from natural aggregates depends on strength and modulus of elasticity of aggregate grains, shape of grains, on curve of granularity and on hard-set cement paste strength. The compressive strength of lightweight structural concrete with porous aggregates depends not only on the hard-set binding agent strength but both on the aggregate grains strength and the aggregate its volume in concrete mixture. Lightweight porous aggregate aggloporite was used for experimental test. Aggloporite is an artificial porous aggregate made from fly ash, clay and coal dust. Porous surface of aggloporite grains enables the fine cement particles with the water to penetrate into the surface pores at mixing, which results in strengthening of aggloporite grain surface in the course of cement hydration. The results of experimental tests of the relations between the LWSC strength, aggloporite grain strength and the cohesion strength affected on porous surface of aggloporite grain with the products of hydrating cement paste is presented.

引用

页码：7 / 10

页数：4

共 50 条

[21] Effects of binder strength and aggregate size on the compressive strength and void ratio of porous concrete [J].

P Chindaprasirt ;

S Hatanaka ;

N Mishima ;

Y Yuasa ;

T Chareerat .

International Journal of Minerals Metallurgy and Materials, 2009, 16 (06) :714-719

[22] Microstructural investigation and strength properties of structural lightweight concrete produced with Zeolitic tuff aggregate [J].

Pekgoz, Mahfuz ;

Tekin, Ilker .

JOURNAL OF BUILDING ENGINEERING, 2021, 43

[23] THE THERMAL CONDUCTIVITY AND COMPRESSIVE STRENGTH OF LIGHTWEIGHT CONCRETE PRODUCED FROM RAW PERLITE AGGREGATE [J].

Yildirim, Serdar ;

Tuerkmen, Ibrahim ;

Guel, Ruestem .

PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON THE CONCRETE FUTURE, 2008, :475-480

[24] Study on the curve of lightweight aggregate concrete compressive strength by rebound method [J].

Gao Lixiong ;

Kong Lijuan ;

Du Xuegang .

ECOLOGICAL ENVIRONMENT AND TECHNOLOGY OF CONCRETE, 2011, 477 :268-273

[25] Shrinkage and Strength Properties of Coal Gangue Ceramsite Lightweight Aggregate Concrete [J].

Wang, Yunsen ;

Qiu, Jingping ;

Zeng, Chao .

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2020, 2020

[26] Preparation of high strength lightweight aggregate concrete with the vibration mixing process [J].

Xiong, Guangqi ;

Wang, Chong ;

Zhou, Shuai ;

Jia, Xiaolong ;

Luo, Wei ;

Liu, Jiawen ;

Peng, Xiang .

CONSTRUCTION AND BUILDING MATERIALS, 2019, 229

[27] Size effect on tensile strength of lightweight aggregate concrete: A numerical investigation [J].

Liu, Yang ;

Wu, Tao ;

Wei, Hui ;

Liu, Xi ;

Pan, Yi .

CONSTRUCTION AND BUILDING MATERIALS, 2022, 323

[28] Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete [J].

Balendran, RV ;

Zhou, FP ;

Nadeem, A ;

Leung, AYT .

BUILDING AND ENVIRONMENT, 2002, 37 (12) :1361-1367

[29] Porous concrete with optimum fine aggregate and fibre for improved strength [J].

Karanth, Savithri S. ;

Kumar, U. Lohith ;

Danigond, Naveen .

ADVANCES IN CONCRETE CONSTRUCTION, 2019, 8 (04) :305-309

[30] Influence of aggregate size on compressive strength of pervious concrete [J].

Yu, Fan ;

Sun, Daquan ;

Wang, Jue ;

Hu, Minjun .

CONSTRUCTION AND BUILDING MATERIALS, 2019, 209 :463-475

← 1 2 3 4 5 →