Experimental and numerical analysis of single lap composite joints with inter-adherend fibers

被引：20

作者：

Beylergil, Bertan ^{[2
]}

Cunedioglu, Yusuf ^{[2
]}

Aktas, Alaattin ^{[1
]}

机构：

[1] Istanbul Univ, Dept Mech Engn, Fac Engn, TR-34320 Istanbul, Turkey

[2] Nigde Univ, Dept Mech Engn, Fac Engn, TR-51245 Nigde, Turkey

来源：

COMPOSITES PART B-ENGINEERING | 2011年 / 42卷 / 07期

关键词：

Adhesion; Mechanical testing; Numerical analysis; Stitching; I DELAMINATION TOUGHNESS; LAMINATED COMPOSITES; BONDED JOINTS; STRENGTH; MODE; FAILURE; PERFORMANCE; BEHAVIOR; DAMAGE; CFRPS;

D O I：

10.1016/j.compositesb.2011.06.010

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, a novel reinforcing method for glass-fiber reinforced composites, which consists of inter-adherend glass fibers (IAF) that get through the composite adherend like a pin, was investigated experimentally and numerically. Two types of joints were investigated. One is the traditional single lap joint without inter-adherend (Type A) and the other is Type B in which the fiber pin was used. Static tensile tests were performed at ambient environment in accordance with ASTM standards. In the numerical analysis, ANSYS 12.0 software package was used. The results show that the fibers improve the ultimate strength and damage tolerance of composite joints. In addition, the numerical results show a good agreement with the experimental ones. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：1885 / 1896

页数：12

共 55 条

[31] Effect of through-thickness stitching on the fatigue life of composite single-lap joints [J].

Jain, LK ;

Leong, KH ;

Mai, YW ;

Tong, LY .

APPLIED COMPOSITE MATERIALS, 1998, 5 (06) :399-409

[32]

Jain LK, 1998, COMPOS SCI TECHNOL, V58, P829, DOI 10.1016/S0266-3538(97)00186-3

[33] STRENGTH AND FAILURE MODES OF BONDED SINGLE LAP JOINTS BETWEEN CROSS-PLY ADHERENDS [J].

KAIROUZ, KC ;

MATTHEWS, FL .

COMPOSITES, 1993, 24 (06) :475-484

[34] Failure mode and strength of uni-directional composite single lap bonded joints with different bonding methods [J].

Kim, KS ;

Yoo, JS ;

Yi, YM ;

Kim, CG .

COMPOSITE STRUCTURES, 2006, 72 (04) :477-485

[35]

Krueger R., 2002, VIRTUAL CRACK CLOSUR

[36] Improving performance of GFRP/aluminum single lap joints using bolted/co-cured hybrid method [J].

Matsuzaki, Ryosuke ;

Shibata, Motoko ;

Todoroki, Akira .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2008, 39 (02) :154-163

[37] Review of z-pinned composite laminates [J].

Mouritz, A. P. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (12) :2383-2397

[38]

Mouritz AP., 2001, Compos Part BEngineering, DOI DOI 10.1016/S1359-8368(01)00015-4

[39] Three dimensional failure analysis and damage propagation behavior of adhesively bonded single lap joints in laminated FRP composites [J].

Panigrahi, S. K. ;

Pradhan, B. .

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2007, 26 (02) :183-201

[40]

PARTRIDGE IK, 2003, P 35 ISTC SAMPE TECH

← 1 2 3 4 5 6 →