Computational study of rib shape and configuration for heat transfer and fluid flow characteristics of microchannel heat sinks with fan-shaped cavities

被引：55

作者：

Zhu, Qifeng ^{[1
,2
]}

Jin, Yangyang ^{[1
]}

Chen, Junjie ^{[1
]}

Su, Ruirui ^{[1
]}

Zhu, Feiyue ^{[1
]}

Li, Haixia ^{[1
]}

Wan, Jianfeng ^{[1
]}

Zhang, Hongwei ^{[2
]}

Sun, Haolei ^{[2
]}

Cui, Yang ^{[1
]}

Xia, Huixue ^{[1
]}

机构：

[1] Henan Polytech Univ, Dept Energy & Power Engn, Sch Mech & Power Engn, 2000 Century Ave, Jiaozuo 454000, Henan, Peoples R China

[2] Henan Xinfei Elect Co Ltd, Xinxiang 453000, Henan, Peoples R China

来源：

APPLIED THERMAL ENGINEERING | 2021年 / 195卷

基金：

中国国家自然科学基金;

关键词：

Microchannel heat sinks; Fluid flow characteristics; Heat transfer characteristics; Heat sink designs; Heat dissipation; Computational fluid dynamics; TRANSFER ENHANCEMENT; RECTANGULAR MICROCHANNEL; PERFORMANCE EVALUATION; TRANSFER AUGMENTATION; VISCOUS DISSIPATION; REENTRANT CAVITIES; CHANNEL; OPTIMIZATION; RESISTANCE; DYNAMICS;

D O I：

10.1016/j.applthermaleng.2021.117171

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Cavities and ribs are usually utilized in the design of microchannel heat sink systems, and their combination may lead to the optimum overall performance. However, it remains unclear how different combination methods contribute to the performance and efficiency of the systems. Computational fluid dynamics simulations were conducted to identify the optimum rib shape and configuration for the systems with fan-shaped cavities. The ribs are rectangular, diamond, hexagonal, or elliptic in cross-section. The effects of rib shape, dimensions, and configuration are investigated, and the optimum comprehensive performance was determined. The results indicated that the shape, dimensions, and configuration of ribs are important factors that affect performance and heat transfer efficiency. The shape and position of ribs must be optimized to minimize pressure drop while maximizing heat removal efficiency. The shape of ribs can be an important factor in obtaining high efficiency of heat removal while limiting the pressure drop across the channels. When the ribs are rectangular in shape, the maximum pressure drop occurs but the maximum relative Nusselt number is achieved. The maximum comprehensive performance factor is achieved when the ribs are elliptic in shape and the Reynolds number is highest. Further improvement in performance can be achieved by choosing particular rib dimensions and configuration. In order to provide appropriate benefit to such a microchannel heat sink system without inducing additional pressure drop that reduces the performance of the system, it is desirable to properly shape and position the ribs relative to the cooling flow and the cavities in a way that takes best advantage of the benefits provided by the combination of cavities and ribs. The effect of trailing edge vortexes on heat transfer performance is significant. A maximum comprehensive performance factor of 1.96 is achieved when the Reynolds number of the laminar flow is 460.

引用

页数：18

共 76 条

[31] Boiling heat transfer, pressure drop, and flow pattern in a horizontal square minichannel [J].

Jige, Daisuke ;

Inoue, Norihiro .

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2019, 78

[32] Size dependences of hydraulic resistance and heat transfer of fluid flow in elliptical microchannel heat sinks with boundary slip [J].

Jing, Dalei ;

Song, Shiyu ;

Pan, Yunlu ;

Wang, Xiaoming .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 119 :647-653

[33] Study of laminar single phase frictional factor and Nusselt number in In-line micro pin-fin heat sink for electronic cooling applications [J].

Kewalramani, Gagan, V ;

Hedau, Gaurav ;

Saha, Sandip K. ;

Agrawal, Amit .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 138 :796-808

[34] Viscous dissipation effects in microtubes and microchannels [J].

Koo, J ;

Kleinstreuer, C .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2004, 47 (14-16) :3159-3169

[35] Optimum thermal performance of microchannel heat sink by adjusting channel width and height [J].

Kou, Hong-Sen ;

Lee, Ji-Jen ;

Chen, Chih-Wei .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2008, 35 (05) :577-582

[36] Heat transfer and flow characteristics of microchannels with solid and porous ribs [J].

Li, Fei ;

Ma, Qingming ;

Xin, Gongming ;

Zhang, Jingchao ;

Wang, Xinyu .

APPLIED THERMAL ENGINEERING, 2020, 178

[37] Heat transfer enhancement in microchannel heat sinks with dual split-cylinder and its intelligent algorithm based fast optimization [J].

Li, Ping ;

Guo, Dingzhang ;

Huang, Xinyue .

APPLIED THERMAL ENGINEERING, 2020, 171

[38] A state-of-the-art overview on the developing trend of heat transfer enhancement by single-phase flow at micro scale [J].

Li, Sining ;

Zhang, Hongna ;

Cheng, Jianping ;

Li, Xiaobin ;

Cai, Weihua ;

Li, Zengyao ;

Li, Fengchen .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 143

[39] Characteristics of laminar flow and heat transfer in microchannel heat sink with triangular cavities and rectangular ribs [J].

Li, Y. F. ;

Xia, G. D. ;

Ma, D. D. ;

Jia, Y. T. ;

Wang, J. .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 98 :17-28

[40] Study on thermal performance of microchannel heat sinks with periodic jetting and throttling structures in sidewalls [J].

Ma, D. D. ;

Xia, G. D. ;

Wang, W. ;

Jia, Y. T. ;

Yang, Y. C. .

APPLIED THERMAL ENGINEERING, 2019, 158

← 1 2 3 4 5 6 7 8 →