Non-destructive evaluation of creep damage of Ni-based superalloy using a scanning blue laser microscope

被引:1
|
作者
Akahoshi, Kuniaki [1 ]
Ogawa, Kazuhiro [1 ]
Miura, Hideo [1 ]
机构
[1] Tohoku Univ, Grad Sch Engn, Fracture & Reliabil Res Inst, Aoba Ku, Sendai, Miyagi 9808579, Japan
来源
PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4 | 2007年 / 353-358卷
关键词
non-destructive evaluation; creep damage; Ni-based superalloy; scanning laser microscope;
D O I
10.4028/www.scientific.net/KEM.353-358.2391
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In order to assure the reliability of advanced gas turbine systems, it is very important to evaluate the damage of high temperature materials such as Ni-based superalloys under creep and fatigue conditions quantitatively. The refractive index of the gamma-prime phase is found to be smaller than that of the gamma phase in the Ni-based superalloy, when the wavelength of an irradiated laser beam is shorter than 500 nm. Therefore, it is possible to evaluate the creep damage of this material quantitatively and non-destructively by observing the change of the micro texture in a grain (rafting) using a scanning laser microscope.
引用
收藏
页码:2391 / 2394
页数:4
相关论文
共 50 条
  • [21] A Technique for the Non-Destructive EUV Mask Sidewall Angle Measurement Using Scanning Electron Microscope
    Lee, Sangheon
    Lee, Junhwan
    Ban, Sanghyun
    Oh, Hye-Keun
    Nam, Byungho
    Kim, Sangpyo
    Yim, Donggyu
    Kim, Ohyun
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2013, 13 (12) : 8032 - 8035
  • [22] Non-destructive measurement of bulk inhomogeneities in silicon using the scanning infra-red microscope
    Mule'Stagno, L
    Bazzali, A
    Olmo, M
    Torok, P
    Falster, R
    Fraundorf, P
    MICROSCOPY OF SEMICONDUCTING MATERIALS 1997, 1997, (157): : 689 - 692
  • [23] Numerical investigation of creep damage development in the Ni-based superalloy IN738 LC at 850°C
    Brocks, W
    Qi, WD
    CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 2002, 3 (03): : 313 - 320
  • [24] Integrating Non-Destructive Testing, Laser Scanning, and Numerical Modeling for Damage Assessment: The Room of the Elements
    Napolitano, Rebecca
    Hess, Michael
    Glisic, Branko
    HERITAGE, 2019, 2 (01): : 151 - 168
  • [25] Analysis and prediction of non-isothermal creep behavior in Ni-based single crystal superalloy
    Liang, JianWei
    Wang, JiaPo
    Wen, ZhiXun
    Yue, ZhuFeng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 707 : 559 - 566
  • [26] High-Temperature Creep Behavior and Damage Mechanism of an Advanced Powder Metallurgy Ni-Based Superalloy
    Li, Xinyu
    Zhang, Haopeng
    Li, Xiaokun
    Jia, Jian
    Liu, Changsheng
    Liu, Jiantao
    Zhang, Yiwen
    ADVANCED ENGINEERING MATERIALS, 2024, 26 (09)
  • [27] Non-destructive characterization of the spatial variation of γ/γ' lattice misfit in a single-crystal Ni-based superalloy by energy-resolved neutron imaging
    Malamud, Florencia
    Roberto Santisteban, Javier
    Gao, Yan
    Shinohara, Takenao
    Oikawa, Kenichi
    Tremsin, Anton
    JOURNAL OF APPLIED CRYSTALLOGRAPHY, 2022, 55 : 228 - 239
  • [28] Microstructural Damage Evaluation in Ni-based Superalloy Gas Turbine Blades by Fractal Analysis
    Tarafder, Mita
    Sujata, M.
    Ranganath, V. R.
    Tarafder, S.
    Bhumik, S. K.
    6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION, 2013, 55 : 289 - 294
  • [29] Non-destructive material homogeneity evaluation using scanning millimeter wave microscopy
    Laurinavicius, A.
    Anbinderis, T.
    Ikonikova, J.
    Prishutov, Yu.
    ACTA PHYSICA POLONICA A, 2008, 113 (03) : 1051 - 1054
  • [30] Non-destructive material homogeneity evaluation using scanning millimeter wave beam
    Laurinavicius, A.
    Anbinderis, T.
    Ikonikova, J.
    Prishutov, Yu.
    Kuch, S.
    Gorbatenko, V.
    Derkach, V. N.
    SIXTH INT KHARKOV SYMPOSIUM ON PHYSICS AND ENGINEERING OF MICROWAVES, MILLIMETER AND SUBMILLIMETER WAVES/WORKSHOP ON TERAHERTZ TECHNOLOGIES, VOLS 1 AND 2, 2007, : 893 - +