Experimental and numerical investigation of Mode-I & Mode-II fatigue crack growth in unidirectional composites using XIGA-CZM approach

被引：15
|
作者：
Kaushik, Vikas [1 ]
Ghosh, Anup [1 ]
机构：
[1] Indian Inst Technol Kharagpur, Aerosp Engn Dept, Kharagpur 721302, W Bengal, India
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2020年 / 134卷
关键词：
Fibre bridging effect; Cohesive zone modelling (CZM); Fatigue crack growth; Extended Isogeometric Analysis (XIGA); Fractography; DELAMINATION PROPAGATION; CARBON/EPOXY COMPOSITE; ISOGEOMETRIC ANALYSIS; DRIVEN DELAMINATION; SIMULATION METHOD; FRACTURE; METHODOLOGY; PREDICTION; ELEMENTS;
D O I：
10.1016/j.ijfatigue.2019.105461
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This article presents an investigation of interlaminar fatigue crack growth in unidirectional (AS4/914) composites. Influence of fibre bridging on Mode-I interfacial fatigue properties is investigated under increased loading displacement and constant R-ratio. Significant shift is Paris law resistance curves represents the influence of fibre bridging in DCB specimen. Mode-II fatigue tests are carried out on precracked ENF specimens. A new set of interfacial fatigue properties are generated and incorporated into numerical formulation. Numerical simulations are carried out with combined framework of XIGA-CZM. Numerical prediction of crack propagation shows good agreement with the experimental results. Fractography is carried out using SEM.
引用
收藏
页数：12
相关论文
共 50 条
  • [21] Computational modeling of three-dimensional mixed mode-I/II/III fatigue crack growth problems and experiments
    Ayhan, Ali O.
    Demir, Oguzhan
    COMPUTERS & STRUCTURES, 2021, 243
  • [22] Characterising mode I/mode II fatigue delamination growth in unidirectional fibre reinforced polymer laminates
    Al-Khudairi, O.
    Hadavinia, H.
    Waggott, A.
    Lewis, E.
    Little, C.
    MATERIALS & DESIGN, 2015, 66 : 93 - 102
  • [23] Reduction of mode I fatigue crack growth rate due to occasional mode II loading
    Dahlin, P
    Olsson, M
    INTERNATIONAL JOURNAL OF FATIGUE, 2004, 26 (10) : 1083 - 1093
  • [24] Mixed-mode (I plus II) fatigue crack growth of marine steels in Arctic environments
    Qiao, Kaiqing
    Liu, Zhijie
    Guo, Qiuyu
    Wang, Xiaobang
    Zhang, Shengwei
    OCEAN ENGINEERING, 2024, 310
  • [25] Study of mode-I interlaminar crack growth in DCB specimens of fibre-reinforced composites
    Todo, M
    Jar, PYBJ
    COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (01) : 105 - 118
  • [26] Mixed-mode fatigue crack growth analysis using peridynamic approach
    Jung, Jeehyun
    Seok, Jongwon
    INTERNATIONAL JOURNAL OF FATIGUE, 2017, 103 : 591 - 603
  • [27] Application of the Hartman-Schijve equation to represent Mode I and Mode II fatigue delamination growth in composites
    Jones, R.
    Pitt, S.
    Brunner, A. J.
    Hui, D.
    COMPOSITE STRUCTURES, 2012, 94 (04) : 1343 - 1351
  • [28] Experimental and numerical investigation of mixed-mode fatigue crack growth in nickel-based superalloy at high temperature
    Xie, Qikun
    Qi, Hongyu
    Li, Shaolin
    Yang, Xiaoguang
    Shi, Duoqi
    ENGINEERING FRACTURE MECHANICS, 2022, 273
  • [29] Mode I fatigue crack growth reduction mechanisms after a single Mode II load cycle
    Dahlin, P.
    Olsson, M.
    ENGINEERING FRACTURE MECHANICS, 2006, 73 (13) : 1833 - 1848
  • [30] Experimental and numerical investigation on fatigue crack growth behavior of commercial pure titanium under I-II mixed mode loading at negative load ratios
    Zhang, Peng
    Xie, Lin-qi
    Zhou, Chang-yu
    He, Xiao-hua
    INTERNATIONAL JOURNAL OF FATIGUE, 2020, 138
12345