Mechanism of huge Luders-type deformation in ultrafine grained austenitic stainless steel

被引：118
作者：
Gao, Si [1 ]
Bai, Yu [1 ]
Zheng, Ruixiao [1 ]
Tian, Yanzhong [2 ]
Mao, Wenqi [1 ]
Shibata, Akinobu [1 ,3 ]
Tsuji, Nobuhiro [1 ,3 ]
机构：
[1] Kyoto Univ, Dept Mat Sci & Engn, Sakyo Ku, Yoshida Honmachi, Kyoto 6068501, Japan
[2] Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China
[3] Kyoto Univ, ESISM, Sakyo Ku, Yoshida Honmachi, Kyoto 6068501, Japan
来源：
SCRIPTA MATERIALIA | 2019年 / 159卷
关键词：
Yield point; Luders band; Plastic instability; Deformation induced martensitic transformation; Austenitic stainless steel; Ultra-fine grains; SEVERE PLASTIC-DEFORMATION; HIGH DUCTILITY; MARTENSITIC-TRANSFORMATION; ANNEALING BEHAVIOR; NANO-CRYSTALLINE; HIGH-STRENGTH; MICROSTRUCTURE; COLD; STABILITY; TENSILE;
D O I：
10.1016/j.scriptamat.2018.09.007
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A remarkable Luders-type localized deformation having a huge Luders strain of 0.4 was observed in tensile deformation of an ultra-fine grained austenitic stainless steel fabricated by two-step cold rolling and annealing processes. It was clarified that the Luders-type deformation in the material was essentially the same as necking caused by plastic instability, but the enhanced strain hardening by deformation induced martensitic transformation realized the stable propagation of the strain localized band, leading to the huge Luders strain as well as high strength and large ductility of the material. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：28 / 32
页数：5
相关论文
共 48 条
  • [1] Edalati K., 2015, MATER RES LETT, V3831, P1
  • [2] Extreme grain refinement by severe plastic deformation: A wealth of challenging science
    Estrin, Y.
    Vinogradov, A.
    [J]. ACTA MATERIALIA, 2013, 61 (03) : 782 - 817
  • [3] Production of nano/submicron grained AISI 304L stainless steel through the martensite reversion process
    Forouzan, Farnoosh
    Najafizadeh, Abbas
    Kermanpur, Ahmad
    Hedayati, Ali
    Surkialiabad, Roohallah
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (27-28): : 7334 - 7339
  • [4] Luders-like deformation induced by delta-ferrite-assisted martensitic transformation in a dual-phase high-manganese steel
    Fu, Liming
    Li, Zhiming
    Wang, Huanrong
    Wang, Wei
    Shan, Aidang
    [J]. SCRIPTA MATERIALIA, 2012, 67 (03) : 297 - 300
  • [5] Die-hard plastic deformation behavior in an ultrahigh-strength Fe-Ni-Al-C alloy
    Furuta, T.
    Kuramoto, S.
    Ohsuna, T.
    Oh-ishi, K.
    Horibuchi, K.
    [J]. SCRIPTA MATERIALIA, 2015, 101 : 87 - 90
  • [6] Characterization of cold-rolled heterogeneous microstructure formed by multimodal deformation in an Fe-Ni-Al-C alloy with lattice softening
    Furuta, Tadahiko
    Miyazaki, Izuru
    Oh-ishi, Keiichiro
    Kuramoto, Shigeru
    Shibata, Akinobu
    Tsuji, Nobuhiro
    [J]. MATERIALS & DESIGN, 2018, 153 : 166 - 176
  • [7] Yielding behavior and its effect on uniform elongation in IF steel with various grain sizes
    Gao, Si
    Chen, Meichuan
    Joshi, Mohit
    Shibata, Akinobu
    Tsuji, Nobuhiro
    [J]. JOURNAL OF MATERIALS SCIENCE, 2014, 49 (19) : 6536 - 6542
  • [8] Correlation between Continuous/Discontinuous Yielding and Hall-Petch Slope in High Purity Iron
    Gao, Si
    Shibata, Akinobu
    Chen, Meichuan
    Park, Nokeun
    Tsuji, Nobuhiro
    [J]. MATERIALS TRANSACTIONS, 2014, 55 (01) : 69 - 72
  • [9] Fatigue behavior of ultrafine-grained and coarse-grained Cr-Ni austenitic stainless steels
    Hamada, A. S.
    Karjalainen, L. P.
    Surya, P. K. C. Venkata
    Misra, R. D. K.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (10-11): : 3890 - 3896
  • [10] Han J., 2014, ACTA MAT, V633, P9
12345