Delamination detection and characterisation of bridging tractions using long FBG optical sensors

被引：101

作者：

Sorensen, Larissa ^{[1
]}

Botsis, John ^{[1
]}

Gmuer, Thomas ^{[1
]}

Cugnoni, Joeel ^{[1
]}

机构：

[1] Ecole Polytech Fed Lausanne, LMAF, CH-1015 Lausanne, Switzerland

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2007年 / 38卷 / 10期

关键词：

carbon fibre; delamination; finite element analysis (FEA); bragg grating;

D O I：

10.1016/j.compositesa.2007.07.009

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Measurements of non-uniform strains due to the propagation of mode-I delamination and identification of bridging tractions in double cantilever beam (DCB) composite specimens made of uniaxially reinforced AS4/PPS are presented. A fibre Bragg grating (FBG) of 22 or 35 mm is embedded parallel to the reinforcing fibres, during consolidation and above the delamination plane. Strain distributions along the sensor are obtained by optical low-coherence reflectometry and inverse scattering. The specimen's residual strains in the sensor are used as an initial reference, even when it causes birefringence. Observations and strain measurements indicate fibre bridging across the delamination plane. The measured distribution of strains in the FBG sensor and numerical modeling are used in an inverse procedure to determine the actual distribution of bridging stresses during delamination. (c) 2007 Elsevier Ltd. All rights reserved.

引用

页码：2087 / 2096

页数：10

共 22 条

[1] Damage assessment in hybrid laminates using an array of embedded fibre optic sensors [J].

Austin, TSP ;

Singh, MM ;

Gregson, PJ ;

Dakin, JP ;

Powell, PM .

SMART STRUCTURES AND MATERIALS 1999: SMART SYSTEMS FOR BRIDGES, STRUCTURES AND HIGHWAYS, 1999, 3671 :281-288

[2] An interior trust region approach for nonlinear minimization subject to bounds [J].

Coleman, TF ;

Li, YY .

SIAM JOURNAL ON OPTIMIZATION, 1996, 6 (02) :418-445

[3]

COMTE O, 2005, TEHSIS EPFL

[4]

Cugnoni J, 2006, ADV ENG MATER, V8, P184, DOI [10.1002/adem.200400236, 10.1002/adem.200500236]

[5] On a direct determination of non-uniform internal strain fields using fibre Bragg gratings [J].

Giaccari, P ;

Dunkel, GR ;

Humbert, L ;

Botsis, J ;

Limberger, HG ;

Salathé, RP .

SMART MATERIALS AND STRUCTURES, 2005, 14 (01) :127-136

[6] Local coupling-coefficient characterization in fiber Bragg gratings [J].

Giaccari, P ;

Limberger, HG ;

Salathé, RP .

OPTICS LETTERS, 2003, 28 (08) :598-600

[7] Fiber optic sensor technology: an overview [J].

Grattan, KTV ;

Sun, T .

SENSORS AND ACTUATORS A-PHYSICAL, 2000, 82 (1-3) :40-61

[8] Fiber Bragg grating technology fundamentals and overview [J].

Hill, KO ;

Meltz, G .

JOURNAL OF LIGHTWAVE TECHNOLOGY, 1997, 15 (08) :1263-1276

[9]

Kersey A. D., 1996, Optical Fiber Technology: Materials, Devices and Systems, V2, P291, DOI 10.1006/ofte.1996.0036

[10] Non-destructive evaluation of smart materials by using extrinsic Fabry-Perot interferometric and fiber Bragg grating sensors [J].

Leng, JS ;

Asundi, A .

NDT & E INTERNATIONAL, 2002, 35 (04) :273-276

← 1 2 3 →