Activated flux TIG welding of non- ferrous metals

被引：0

作者：

Kurtulmus, Memduh ^{[1
]}

Yukler, Ahmet Irfan ^{[2
]}

Dogan, Ezgi ^{[3
]}

机构：

[1] Marmara Univ, Appl Sci High Sch, Goztepe Campus, TR-347222 Istanbul, Turkey

[2] Nisantasi Univ, Engn Fac, 1453 AgaogluMaslak, TR-34398 Sariyer, Turkey

[3] OZMETAL AS, TR-34775 Istanbul, Turkey

来源：

INDIAN JOURNAL OF CHEMICAL TECHNOLOGY | 2019年 / 26卷 / 02期

关键词：

TIG welding; A-TIG welding; Non-ferrous metals welding; CADMIUM CHLORIDE FLUX; MECHANICAL-PROPERTIES; OXIDE FLUXES; MAGNESIUM; MICROSTRUCTURES; PENETRATION; TITANIUM; ALLOYS;

D O I：

暂无

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

TIG welding process has high levels of stability and permits more refined control than the majority of other arc welding processes. The principal disadvantages of TIG lie in the limited thickness of material which can be welded in a single pass. Activated Flux Tungsten Inert Gas (A-TIG) welding can increase the joint penetration and weld depth/width ratio, thereby reducing angular distortion of the weldment. In this review paper, A-TIG welding properties of nonferrous metals are examined. How the flux increases the penetration depth is explained and then the effects of the chemical composition and thickness of the flux are described in detail.

引用

页码：164 / 169

页数：6

共 59 条

[1]

Ahmed N, 2005, NEW DEV INADVANCED W

[2]

[Anonymous], 2013, INT J IRON STEEL SOC

[3]

[Anonymous], 1996, WELD MET FAB

[4] TIG and A-TIG welding experimental investigations and comparison to simulation Part 1: Identification of Marangoni effect [J].

Berthier, A. ;

Paillard, P. ;

Carin, M. ;

Valensi, F. ;

Pellerin, S. .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (08) :609-615

[5]

de Azevedo Alessandra Gois Luciano, 2010, Welding International, V24, P571, DOI 10.1080/09507110903568794

[6] Activated flux TIG welding of titanium [J].

Dey, H. C. ;

Albert, S. K. ;

Bhaduri, A. K. ;

Mudali, U. Kamachi .

WELDING IN THE WORLD, 2013, 57 (06) :903-912

[7]

Gurevich SM, 1965, Automatic Welding, V18, P1

[8]

Gurevich SM, 1966, AVTOMAT SVARKA, V12, P13

[9]

Hiraoka H, 1998, WELD INT, V12, P372

[10]

Howse D, 2002, THESIS

← 1 2 3 4 5 6 →