Study on the Wear Mechanism of PCD Tools in High-speed Milling of Al-Si Alloy

被引:19
作者
Wang, Yongguo [1 ]
Liu, Biao [1 ]
Song, Jiongyi [2 ]
Yan, Xiangping [1 ]
Wu, Kangmei [2 ]
机构
[1] Shanghai Univ, Sch Mechatron Engn & Automat, Shanghai 200072, Peoples R China
[2] SAIC Motor Passenger Vehicle Co Engine Plant, SAIC Motor, Shanghai 201306, Peoples R China
来源
ADVANCED MANUFACTURING TECHNOLOGY AND CUTTING TOOLS | 2012年 / 381卷
关键词
Wear mechanism; PCD; Al-Si alloy; Abrasive wear; Adhesive wear; PERFORMANCE;
D O I
10.4028/www.scientific.net/AMR.381.16
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Polycrystalline diamond (PCD) tools have been obtained increasing application in aluminum alloy processing industry due to the excellent surface finish and tool life comparing with other traditional tools. Investigation of the wear mechanism of PCD milling tool for machining Al-Si alloy at cutting speed of 5000m/min (n=12732r/min) has been performed. The wear morphology of tool has been studied by scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). Results show that PCD milling tool suffers from abrasive wear and diffusion wear on the flank face and adhesive wear on the rake face in the machining process.
引用
收藏
页码:16 / +
页数:2
相关论文
共 50 条
  • [1] Wear mechanisms of PCD tool in high-speed milling of SiC p/Al composites
    Ge Y.-F.
    Xu J.-H.
    Fu Y.-C.
    Guangxue Jingmi Gongcheng/Optics and Precision Engineering, 2011, 19 (12): : 2907 - 2918
  • [2] Tool wear coated with PCD in high-speed milling of graphite
    Zeilmann, Rodrigo P.
    Zanella, Cassiano
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 97 (1-4) : 1497 - 1503
  • [3] Investigation on the cutting force of high-speed milling of high volume fraction of SiCp/Al composites with PCD tools
    Peng, Song
    Xie, Li-jing
    Wang, Xi-bin
    Fu, Na-xin
    Shi, Xing-kuan
    EIGHTH CHINA NATIONAL CONFERENCE ON FUNCTIONAL MATERIALS AND APPLICATIONS, 2014, 873 : 350 - +
  • [4] Surface integrity study of high-speed drilling of Al-Si alloy using HSS drill
    Farid, A. Akhavan
    Sharif, S.
    Idris, M. H.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2011, 225 (B7) : 1001 - 1007
  • [5] PCD coating polishing effect on the tool wear in high-speed milling of graphite
    Zeilmann, Rodrigo P.
    Zanella, Cassiano
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 108 (7-8) : 2579 - 2593
  • [6] Chip morphology study in high speed drilling of Al-Si alloy
    Farid, Ali Akhavan
    Sharif, Safian
    Idris, Mohd Hasbullah
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 57 (5-8) : 555 - 564
  • [7] Wear mechanism of Al-Si alloy impregnated graphite composite under dry sliding
    Goto, H
    Uchijo, K
    WEAR, 2005, 259 (1-6) : 613 - 619
  • [8] Tool Wear and Wear Mechanism of Carbide Tool in Cutting Al-Si Alloy Diecastings
    Shioda, Masahiko
    Mochizuki, Tatsuhiko
    Kishimoto, Yukihiro
    MATERIALS TRANSACTIONS, 2021, 62 (04) : 526 - 531
  • [9] Tool wear and wear mechanism of carbide tool in cutting Al-Si alloy diecastings
    Shioda M.
    Mochizuki T.
    Kishimoto Y.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2019, 69 (03): : 174 - 179
  • [10] Investigation of friction behavior and wear mechanism of high-silicon content Al-Si alloy
    Zhu, Xue-Wei
    Wang, Ri-Chu
    Wang, Xiao-Feng
    Peng, Jian
    Gongneng Cailiao/Journal of Functional Materials, 2015, 46 (08): : 08063 - 08066and08071