Development and characterization of disk supported carbon membrane prepared by one-step coating-carbonization cycle

被引:39
作者
Ismail, N. H. [1 ,2 ]
Salleh, W. N. W. [1 ,2 ]
Sazali, N. [1 ,2 ]
Ismail, A. F. [1 ,2 ]
机构
[1] Univ Teknol Malaysia, Adv Membrane Technol Res Ctr AMTEC, Skudai 81310, Johor Darul Tak, Malaysia
[2] Univ Teknol Malaysia, FCEE, Skudai 81310, Johor Darul Tak, Malaysia
关键词
Supported carbon membrane; Co-polyimide P84; Carbon dioxide; Gas separation; Spray coating; MOLECULAR-SIEVE MEMBRANES; GAS SEPARATION PERFORMANCE; TRANSPORT-PROPERTIES; INTERMEDIATE LAYER; POLYIMIDE; MORPHOLOGY; FABRICATION; STRENGTH; CO2/CH4; BLENDS;
D O I
10.1016/j.jiec.2017.08.038
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Different dope solutions for the alumina disk supported carbon membrane preparation for CO2/N-2 and CO2/CH4 separation was formulated in this study. The prepared polymeric membrane made of commercial co-polyimide BTDA-TDI/MDI (P84) was carbonized at 700 degrees C under N-2 gas flow. A defect-free membrane was obtained when high polymer composition was used. The disk supported carbon membrane with CO2/N-2 and CO2/CH4 selectivity of 15 and 45, respectively, and CO2 permeance of 400 Barrer were obtained by one-step spray coating technique. The polymer composition of 12 wt% was concluded to be the optimum composition for the alumina disk supported carbon membranes. (c) 2017 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:313 / 321
页数:9
相关论文
共 49 条
[1]   Spray-coating of nanoporous carbon membranes for air separation [J].
Acharya, M ;
Foley, HC .
JOURNAL OF MEMBRANE SCIENCE, 1999, 161 (1-2) :1-5
[2]   Fast and easily applicable glycerol-based spray coating [J].
Becherer, Tobias ;
Nascimento, Matheus Vieira ;
Sindram, Julian ;
Noeske, Paul-Ludwig Michael ;
Wei, Qiang ;
Haag, Rainer ;
Grunwald, Ingo .
PROGRESS IN ORGANIC COATINGS, 2015, 87 :146-154
[3]   Engineering substructure morphology of asymmetric carbon molecular sieve hollow fiber membranes [J].
Bhuwania, Nitesh ;
Labreche, Ying ;
Achoundong, Carine S. K. ;
Baltazar, Jose ;
Burgess, Steven K. ;
Karwa, Shweta ;
Xu, Liren ;
Henderson, Clifford L. ;
Williams, P. Jason ;
Koros, William J. .
CARBON, 2014, 76 :417-434
[4]   Carbon molecular sieve membranes derived from a phenolic resin supported on porous ceramic tubes [J].
Centeno, TA ;
Fuertes, AB .
SEPARATION AND PURIFICATION TECHNOLOGY, 2001, 25 (1-3) :379-384
[5]   A high-permeance supported carbon molecular sieve membrane fabricated by plasma-enhanced chemical vapor deposition followed by carbonization for CO2 capture [J].
Cheng, Li-Hua ;
Fu, Ywu-Jang ;
Liao, Kuo-Sung ;
Chen, Jung-Tsai ;
Hu, Chien-Chieh ;
Hung, Wei-Song ;
Lee, Kueir-Rarn ;
Lai, Jui-Yih .
JOURNAL OF MEMBRANE SCIENCE, 2014, 460 :1-8
[6]   Characterization of amorphous and nanocrystalline carbon films [J].
Chu, PK ;
Li, LH .
MATERIALS CHEMISTRY AND PHYSICS, 2006, 96 (2-3) :253-277
[7]   Development and characterization of micropores in carbon molecular sieve membrane for gas separation [J].
Fu, Ywu-Jang ;
Liao, Kuo-Sung ;
Hu, Chien-Chieh ;
Lee, Kueir-Rarn ;
Lai, Juin-Yih .
MICROPOROUS AND MESOPOROUS MATERIALS, 2011, 143 (01) :78-86
[8]   Experimental and computational analysis of carbon molecular sieve membrane formation upon polyetherimide pyrolysis [J].
Hamm, Janice B. S. ;
Muniz, Andre R. ;
Pollo, Liliane D. ;
Marcilio, Nilson R. ;
Tessaro, Isabel C. .
CARBON, 2017, 119 :21-29
[9]   Hydrogen separation and purification in membranes of miscible polymer blends with interpenetration networks [J].
Hosseini, Seyed Saeid ;
Teoh, May May ;
Chung, Tai Shung .
POLYMER, 2008, 49 (06) :1594-1603
[10]   Enhancing the properties and gas separation performance of PBI-polyimides blend carbon molecular sieve membranes via optimization of the pyrolysis process [J].
Hosseini, Seyed Saeid ;
Omidkhah, Mohammad Reza ;
Moghaddam, Abdolsamad Zarringhalam ;
Pirouzfar, Vahid ;
Krantz, William B. ;
Tan, Nicolas R. .
SEPARATION AND PURIFICATION TECHNOLOGY, 2014, 122 :278-289