A Quasi In-Situ Study on the Microstructural Evolution of 2195 Al-Cu-Li Alloy during Homogenization

An optimized homogenization process for Al alloy ingots is key to subsequent material manufacturing, as it largely reduces metallurgical defects, such as segregation and secondary phases. However, studies on their exact microstructural evolution at different homogenization temperatures are scarce, especially for complex systems, such as the 2195 Al-Cu-Li alloy. The present work aims to elucidate the microstructural evolution of the 2195 Al-Cu-Li alloy during homogenization, including the dissolution and precipitation behavior of the T-B (Al7Cu4Li) phase and S (Al2CuMg) phase at different homogenization temperatures. The results show that there are Cu segregation zones (Cu-SZ) at the dendrite boundaries with theta (Al2Cu) and S eutectic phases. When the temperature rises from 300 degrees C to 400 degrees C, fine T-B phases precipitate at the Cu-SZ, and the Mg and Ag in the S phases gradually diffuse into the matrix. Upon further increasing the temperature to 450 degrees C, T-B and theta phases at the grain boundaries are coarsened, and an S-theta phase transition is observed. Finally, at 500 degrees C, all T-B and S phases are dissolved, leaving only theta phases at triangular grain boundaries. This work provides guidance for optimizing the homogenization procedure in 2195 alloys.