Experimental Study on the Lateral Compression and Energy Absorption Characteristic of Steel Tube Filled with Polyurethane Foam

被引：0
作者：
Zhou, Zhaopeng [1 ,2 ]
Qin, Youquan [2 ]
Liu, Fei [2 ]
Wang, Yanmi [2 ]
机构：
[1] PLA Univ Sci & Technol, Nanjing 210007, Jiangsu, Peoples R China
[2] Luoyang Hydraul Engn Technol Inst, Luoyang 471023, Peoples R China
来源：
ADVANCED DEVELOPMENT IN AUTOMATION, MATERIALS AND MANUFACTURING | 2014年 / 624卷
关键词：
Polyurethane Foam; Filling; Round Steel Tube; Lateral Compression; Energy Absorption;
D O I：
10.4028/www.scientific.net/AMM.624.13
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
In order to enhance the lateral compression energy absorption capability of round steel tube without obviously increasing the mass of round steel tube, this paper has developed the polyurethane foam filled round steel tube and through experimental comparison, studied such parameters as the laterally-compressed platform loading, total absorbed energy and energy absorbed per unit mass for the filled tubes and empty tubes of three kinds of pipe diameter. The results show that the round steel tube filled with polyurethane foam can change the deformation mode of round steel tube and increase the energy absorption capability of steel tube substantially with very little increase of mass; the energy absorption efficiency is obviously higher than the one of empty steel tube.
引用
收藏
页码：13 / 19
页数：7
相关论文
共 50 条
  • [41] Experimental Study on Geometries Energy Absorption of Fiber Metal Laminated Mild Steel under Axial Compression
    Sahak, Muhammad Izani
    Mohamad, Ahmad Kamely
    Ariffin, Abdullah Atiq
    METALLURGY TECHNOLOGY AND MATERIALS II, 2013, 813 : 165 - +
  • [42] Research of Compression and Energy Absorption Characteristics of Polyimide Foam
    Li, Mengqian
    Ma, Gang
    Xiao, Jijun
    ENGINEERING AND MANUFACTURING TECHNOLOGIES, 2014, 541-542 : 30 - 34
  • [43] Optimization design of crashworthiness of polyurethane foam filled Origami thin wall square tube based on an surrogate model
    Xiao, Yong
    Wu, Qian Wen
    Liu, Yu
    Wang, Yu Jie
    Long, Hai
    Hu, Hong Lin
    STRUCTURES, 2024, 65
  • [44] Investigating the Mechanical Behavior and Energy Absorption Characteristics of Empty and Foam-Filled Glass/Epoxy Composite Sections under Lateral Indentation
    Taghizadeh, Seyedahmad
    Niknejad, Abbas
    Maccioni, Lorenzo
    Concli, Franco
    MATERIALS, 2024, 17 (15)
  • [45] A numerical study on the axial loading and energy absorption of foam-filled conical tubes
    Ahmad, Z.
    Thambiratnam, D. P.
    Tan, A. C. C.
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON SHOCK & IMPACT LOADS ON STRUCTURES, 2007, : 99 - 106
  • [46] Energy absorption of foam-filled multi-cell composite panels under quasi static compression
    Chen, Jiye
    Fang, Hai
    Liu, Weiqing
    Zhu, Lu
    Zhuang, Yong
    Wang, Jian
    Han, Juan
    COMPOSITES PART B-ENGINEERING, 2018, 153 : 295 - 305
  • [47] A double-cell foam-filled composite block for efficient energy absorption under axial compression
    Taher, Siavash T.
    Zahari, Rizal
    Ataollahi, Simin
    Mustapha, Faizal
    Basri, ShahNor
    COMPOSITE STRUCTURES, 2009, 89 (03) : 399 - 407
  • [48] Viscoelastic foam-filled lattice for high energy absorption
    Ramirez, B. J.
    Misra, U.
    Gupta, V
    MECHANICS OF MATERIALS, 2018, 127 : 39 - 47
  • [49] Theoretical and experimental study on empty and foam-filled columns with square and rectangular cross section under axial compression
    Abedi, Mohammad Mahdi
    Niknejad, Abbas
    Liaghat, Gholam Hossein
    Nejad, Mohammad Zamani
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2012, 65 (01) : 134 - 146
  • [50] Experimental study and finite element analysis on energy absorption of carbon fiber reinforced composite auxetic structures filled with aluminum foam
    Zhao, Changfang
    Goh, Kheng Lim
    Lee, Heow Pueh
    Yin, Chen
    Zhang, Kebin
    Zhong, Jianlin
    COMPOSITE STRUCTURES, 2023, 303
12345