Determination of the shape, size and porosity of fine α-Al2O3 powders prepared by emulsion evaporation

被引:23
作者
Sarikaya, Y [1 ]
Alemdaroglu, T [1 ]
Önal, M [1 ]
机构
[1] Ankara Univ, Fac Sci, Dept Chem, TR-06100 Ankara, Turkey
关键词
Al2O3; calcination; emulsions; porosity; powders-chemical preparation;
D O I
10.1016/S0955-2219(01)00294-1
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Stable water in oil emulsions were prepared from Al(NO3)(3) solutions of different molarities. Dark brown precursors were obtained from these emulsions which were evaporated by adding them dropwise into hot mineral oil. The precursors containing diaspore as raw alumina were calcined at 1000 degreesC and fine alpha -Al2O3 powders were obtained. The photographs of the powders were taken by the use of an electron microscope and their particle size distributions were determined. The shapes and sizes of the powders were discussed. Their mesopore size distributions were obtained from the data of the desorption of nitrogen at 77 K. The relation between the obtained results and the concentrations of the Al(NO3)(3) solutions were discussed. (C) 2001 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:305 / 309
页数:5
相关论文
共 50 条
  • [21] Influence of particle content and porosity on the wear behaviour of cast in situ Al(Mn)-Al2O3(MnO2) composite
    Hamid, AA
    Ghosh, PK
    Jain, SC
    Ray, S
    WEAR, 2006, 260 (4-5) : 368 - 378
  • [22] Preparation of ultrafine spherical AlOOH and Al2O3 powders by aqueous precipitation method with mixed surfactants
    Kong, Jian
    Chao, Bingxuan
    Wang, Teng
    Yan, Yulong
    POWDER TECHNOLOGY, 2012, 229 : 7 - 16
  • [23] Effect of calcination on the production of sintered MgAl2O4 by using different local waste Al2O3 powders
    Arianpour, Asli Cakir
    Turan, Servet
    JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2017, 53 (02) : 975 - 983
  • [24] Effect of calcination on the production of sintered MgAl2O4 by using different local waste Al2O3 powders
    Aslı Çakır Arianpour
    Servet Turan
    Journal of the Australian Ceramic Society, 2017, 53 : 975 - 983
  • [25] Vacancy ordering in the structure of γ-Al2O3
    Kryukova, GN
    Klenov, DO
    Ivanova, AS
    Tsybulya, SV
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2000, 20 (08) : 1187 - 1189
  • [26] The influence of porosity and particles content on dry sliding wear of cast in situ Al(Ti)-Al2O3(TiO2) composite
    Hamid, Abdulhaqq A.
    Ghosh, P. K.
    Jain, S. C.
    Ray, Subrata
    WEAR, 2008, 265 (1-2) : 14 - 26
  • [27] Preparation of Al2O3 Porous Microspheres via an Emulsion Method Combined with a Sol-gel Method
    Yang Hui
    Xie Yuan
    Hao Guisong
    Mao Wenqi
    Guo Xingzhong
    RARE METAL MATERIALS AND ENGINEERING, 2016, 45 : 477 - 480
  • [28] Balancing flexural strength and porosity in DLP-3D printing Al2O3 cores for hollow turbine blades
    Li, Qiaolei
    An, Xiaolong
    Liang, Jingjing
    Liu, Yongsheng
    Hu, Kehui
    Lu, Zhigang
    Yue, Xinyan
    Li, Jinguo
    Zhou, Yizhou
    Sun, Xiaofeng
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2022, 104 : 19 - 32
  • [29] Influence of the type of sepiolite on the modification of the pore-size distribution in γ-Al2O3 supports
    Barrera, A.
    Muramatsu, K.
    Viveros, T.
    Gomez, S.
    Montoya, J. A.
    del Angel, P.
    Perez, G.
    Campa-Molina, J.
    APPLIED CLAY SCIENCE, 2009, 42 (3-4) : 415 - 421
  • [30] Fluorescence study of effect of particle size in PS latex/Al2O3 nanocomposite films
    Ugur, S.
    Sunay, M. Selin
    Pekcan, O.
    PLASTICS RUBBER AND COMPOSITES, 2015, 44 (04) : 129 - 141