Design Optimization of Plate-Fin Heat Exchanger in a Gas Turbine and Supercritical Carbon Dioxide Combined Cycle with Thermal Oil Loop

This paper presents an investigation on the optimum design for a plate-fin heat exchanger (PFHE) of a gas and supercritical carbon dioxide combined cycle which uses thermal oil as intermediate heat-transfer fluid. This may promote the heat transfer from low heat-flux exhaust to a high heat-flux supercritical carbon dioxide stream. The number of fin layers, plate width and geometrical parameters of fins on both sides of PFHE are selected as variables to be optimized by a non-dominated sorting genetic algorithm-II (NSGA-II), which is a multi-objective genetic algorithm. For the confliction of heat transfer area and pressure drop on the exhaust side, which are the objective indexes, the result of NSGA-II is a Pareto frontier. The technique for order of preference by similarity to ideal solution (TOPSIS) approach is applied to choose the optimum solution from the Pareto frontier. Finally, further simulation is performed to analyze the effect of each parameter to objective indexes and confirm the rationality of optimization results.