High-strength titanium alloy/steel butt joint produced via friction stir welding

被引：38
|
作者：
Li, Shuhan [1 ]
Chen, Yuhua [1 ]
Zhou, Xingwen [1 ,2 ]
Kang, Jidong [3 ]
Huang, Yongde [1 ]
Deng, Huaibo [1 ]
机构：
[1] Nanchang Hangkong Univ, Sch Aerosp Mfg Engn, 696 Fenghe Rd South, Nanchang 330063, Jiangxi, Peoples R China
[2] Beihang Univ, Sch Mech Engn & Automat, Beijing 100191, Peoples R China
[3] CanmetMATERIALS, 183 Longwood Rd South, Hamilton, ON L8P 0A5, Canada
来源：
MATERIALS LETTERS | 2019年 / 234卷
关键词：
Titanium alloy; Steel; Welding; Micro structure; Intermetallic compound; WELDED LAP JOINTS; STAINLESS-STEEL; HEAT-TREATMENT; PURE TITANIUM; ALLOY; INTERFACE; 304-STAINLESS-STEEL; MICROSTRUCTURE; TI-6AL-4V; LASER;
D O I：
10.1016/j.matlet.2018.09.094
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
For the first time, defect-free butt welds of titanium alloy/steel were successfully fabricated via friction stir welding. Joints were produced by employing rotation speed varied at 600 and 950 rpm with a constant travel speed of 47.5 mm/min. An increasing of rotation speed leads to thicken the intermetallic compound layer, coarsen the grain size and thus decrease the joint microhardness. Thanks to the solid-state joining process, only a thin FeTi layer was formed at the interface even rotation speed increased to 950 rpm. As a result, all obtained joints fractured at the base steel material. The work carried out clearly shows the good weldability of titanium alloy to steel via friction stir welding. Crown Copyright (C) 2018 Published by Elsevier B.V. All rights reserved.
引用
收藏
页码：155 / 158
页数：4
相关论文
共 50 条
  • [31] Friction stir butt welding thin aluminum alloy sheets
    Yue, Yumei
    Wang, Guoqiang
    Yang, Kang
    Wu, Baosheng
    Yan, Dejun
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (9-12): : 3139 - 3147
  • [32] Friction stir butt welding thin aluminum alloy sheets
    Yumei Yue
    Guoqiang Wang
    Kang Yang
    Baosheng Wu
    Dejun Yan
    The International Journal of Advanced Manufacturing Technology, 2018, 96 : 3139 - 3147
  • [33] MICROSTRUCTURE CONTROL IN THE FLASH BUTT WELDING OF HIGH-STRENGTH ALLOY RAIL
    VINES, MJ
    LANCASTER, G
    METALS FORUM, 1979, 2 (01): : 29 - 33
  • [34] Friction Stir Knead Welding of steel aluminium butt joints
    Geiger, M.
    Micari, F.
    Merklein, M.
    Fratini, L.
    Contorno, D.
    Giera, A.
    Staud, D.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (05): : 515 - 521
  • [35] UPSET BUTT WELDING OF HOT ROLLED HIGH-STRENGTH STEEL SHEETS
    SAKUI, S
    KABASAWA, M
    MATSUDA, Y
    WATANABE, I
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 27 (02) : B55 - B55
  • [36] UPSET BUTT WELDING OF HOT ROLLED HIGH-STRENGTH STEEL SHEETS
    SAKUI, S
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1188 - 1188
  • [37] ELECTRICALLY ASSISTED FRICTION STIR SPOT WELDING OF ALUMINUM ALLOY TO ADVANCED HIGH STRENGTH STEEL
    Chen, Kai
    Liu, Xun
    Ni, Jun
    PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 1, 2017,
  • [38] Effect of Friction Stir Welding on the Strength of Butt Joints of Aluminum Alloy 1565ch
    Ovchinnikov V.V.
    Parfenovskaya O.A.
    Gubin A.M.
    Steel in Translation, 2023, 53 (11) : 962 - 969
  • [39] Keyhole refilled friction stir spot welding of aluminum alloy to advanced high strength steel
    Chen, Kai
    Liu, Xun
    Ni, Jun
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 249 : 452 - 462
  • [40] Structural Transformations Occurring upon Explosive Welding of Alloy Steel and High-Strength Titanium
    Lazurenko, D. V.
    Bataev, I. A.
    Mali, V. I.
    Lozhkina, E. A.
    Esikov, M. A.
    Bataev, V. A.
    PHYSICS OF METALS AND METALLOGRAPHY, 2018, 119 (05): : 469 - 476
12345