Effect of glass nanofibers on mode I interlaminar fracture toughness of glass/epoxy composites

被引：2
作者：
Najafi, Seyed Jalaledin [1 ]
Nosraty, Hooshang [1 ]
Shokrieh, Mahmood Mehrdad [2 ]
Gharehaghaji, Ali Akbar [1 ]
Bahrami, Seyed Hajir [1 ]
机构：
[1] Amirkabir Univ Technol, Dept Text Engn, Tehran, Iran
[2] Iran Univ Sci & Technol, Dept Text Engn, Tehran, Iran
来源：
JOURNAL OF THE TEXTILE INSTITUTE | 2022年 / 113卷 / 12期
关键词：
Glass nanofibers; Mode I fracture; interlaminar fracture toughness; glass hybrid composites; MECHANICAL-PROPERTIES; CARBON; NANOCOMPOSITES; DELAMINATION; NYLON-6; FIBERS; FILMS;
D O I：
10.1080/00405000.2021.2011662
中图分类号：
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号：
0805 ; 080502 ; 0821 ;
摘要：
The idea of using glass nanofibers was proposed to overcome the weakness of out-of-plane properties of glass/epoxy composites. Glass nanofibers were produced by electrospinning solution of tetraethyl orthosilicate and polyvinylpyrrolidone as carrying polymer and dispersing the nanofibers in resin using an ultrasonic mixer. Various percentages of glass nanofibers were mixed with the resin and its effect on the tensile properties was investigated. Based on the tensile strength, the optimal percentage of nanofiber in the matrix was optimized. Finally, the hybrid composite was produced with unidirectional glass fabric using the optimized glass nanofibers content in resin. Interlaminar fracture toughness in mode I test was performed to investigate the effect of the addition of glass nanofibers on composites' mechanical properties. Results showed a significant increase (up to 91%) in interlaminar fracture toughness at the crack initiation state and caused a slight increase in the crack propagation load.
引用
收藏
页码：2714 / 2721
页数：8
相关论文
共 50 条
[11]   Effect of nanoparticles and nanofibers on Mode I fracture toughness of fiber glass reinforced polymeric matrix composites [J].
Kelkar, Ajit D. ;
Mohan, Ram ;
Bolick, Ronnie ;
Shendokar, Sachin .
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2010, 168 (1-3) :85-89
[12]   Mode I fracture toughness of carbon-glass/epoxy interply hybrid composites [J].
Jung, Hana ;
Kim, Yonjig .
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (05) :1955-1962
[13]   Improvements in Mode I interlaminar fracture toughness and in-plane mechanical properties of stitched glass/polyester composites [J].
Velmurugan, R. ;
Solaimurugan, S. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2007, 67 (01) :61-69
[14]   Mode I interlaminar fracture of woven glass/epoxy multidirectional laminates [J].
Pereira, AB ;
de Morais, AB ;
de Moura, MFSF ;
Magalhaes, AG .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2005, 36 (08) :1119-1127
[15]   Effects of carbon/glass nonwoven interleaving veils and their areal density on opening and shearing mode interlaminar fracture toughness of glass epoxy composites [J].
Uppin, Vinayak S. ;
Gouda, P. S. Shivakumar ;
Umarfarooq, M. A. ;
Sridhar, I. ;
Edacherian, Abhilash .
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, 130
[16]   Study of mode II interlaminar fracture toughness of laminated composites of glass and jute fibres in epoxy for structural applications [J].
Chandel, Pankaj Singh ;
Tyagi, Y. K. ;
Jha, Kanishk ;
Kumar, Rajeev ;
Sharma, Shubham ;
Singh, Jujhar ;
Ilyas, R. A. .
FUNCTIONAL COMPOSITES AND STRUCTURES, 2021, 3 (04)
[17]   Mode II interlaminar fracture toughness of woven E-glass/epoxy composites in the presence of mat interleaves [J].
Hosseini, Mohammad Reza ;
Taheri-Behrooz, Fathollah ;
Salamat-Talab, Mazaher .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2020, 98
[18]   Effect of cellulose nanofibers on the fracture toughness mode II of glass fiber/epoxy composite laminates [J].
Sarr, Mouhamadou Moustapha ;
Kosaka, Tatsuro .
HELIYON, 2023, 9 (02)
[19]   Effect of brushing & abrading of laminae on the mode I fracture toughness of glass fiber/epoxy composite [J].
Iqbal, Shahid ;
Khan, Rafiullah .
CONSTRUCTION AND BUILDING MATERIALS, 2020, 261
[20]   Interlaminar Fracture Toughness Evaluation in Glass/Epoxy Composites Using Acoustic Emission and Finite Element Methods [J].
Saeedifar, Milad ;
Fotouhi, Mohamad ;
Najafabadi, Mehdi Ahmadi ;
Toudeshky, Hossein Hosseini .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (01) :373-384
12345