A review on the potential of polylactic acid based thermoplastic elastomer as filament material for fused deposition modelling

被引：41
作者：
Musa, Luqman [1 ,2 ]
Kumar, Nitiyah Krishna [1 ,2 ]
Abd Rahim, Shayfull Zamree [3 ,4 ]
Rasidi, Mohamad Syahmie Mohamad [1 ,2 ]
Rennie, Allan Edward Watson [5 ]
Rahman, Rozyanty [1 ,2 ]
Kanani, Armin Yousefi [5 ]
Azmi, Ahmad Azrem [1 ,2 ]
机构：
[1] Univ Malaysia Perlis, Fac Chem Engn Technol, Arau 02600, Perlis, Malaysia
[2] Univ Malaysia Perlis, Ctr Excellence Geopolymer & Green Technol CEGeoGTe, Adv Polymer Grp, Jejawi 02600, Perlis, Malaysia
[3] Univ Malaysia Perlis, Fac Mech Engn Technol, Arau 02600, Perlis, Malaysia
[4] Univ Malaysia Perlis, Ctr Excellence Geopolymer & Green Technol CEGeoGTe, Green Design & Manufacture Res Grp, Arau 02600, Perlis, Malaysia
[5] Univ Lancaster, Engn Dept, Lancaster Prod Dev Unit, Lancaster, England
来源：
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | 2022年 / 20卷
关键词：
3D printing; Additive manufacturing; Fused deposition modelling; Thermoplastic elastomer; Natural rubber; 3D PRINTING TECHNOLOGY; MECHANICAL-PROPERTIES; PROCESS PARAMETERS; NATURAL-RUBBER; THERMAL-PROPERTIES; POLYMER COMPOSITE; IMPACT STRENGTH; PLA; BEHAVIOR; BLENDS;
D O I：
10.1016/j.jmrt.2022.08.057
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Currently, a range of sectors are implementing three-dimensional (3D) printing, which is a part of additive manufacturing (AM) technology via the fused deposition modelling (FDM) approach. As of now, various filament materials are available in the market and have their limitations. Thermoplastic elastomer (TPE) blend as a filament material in 3D printing should be implemented to overcome the weakness of available filaments. TPE blend stands out due to its flexibility, thermoplastic-like processability, and renewability. Based on the findings, TPE blend filament can be made with polylactic acid (PLA) thermoplastic and elastomers such as natural rubber (NR) and epoxidized natural rubber (ENR). The TPE printed components will be flexible; tough with excellent thermal and mechanical prop-erties. In this paper, the characteristics of TPE are being reviewed to show the potential of TPE material as filament. (C) 2022 The Author(s). Published by Elsevier B.V.
引用
收藏
页码：2841 / 2858
页数：18
相关论文
共 180 条
  • [1] Abdullah NAS, 2019, CHEM ENG TRANS, V72, P427
  • [2] The effect of dynamic vulcanization on the morphological and mechanical properties of the toughened poly (lactic acid)/epoxidized natural rubber
    Abdullah, Nur Amira Sahirah
    Mohamad, Zurina
    [J]. MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES, 2018, 14 (03): : 348 - 352
  • [3] Reinforcing effect of polyurethane sizing on properties of acrylonitrile-butadiene-styrene composites involving short carbon fiber
    Ahmed, Shan Abdulalaziz
    Tirkes, Seha
    Tayfun, Umit
    [J]. SN APPLIED SCIENCES, 2020, 2 (12):
  • [4] Additives for Ambient 3D Printing with Visible Light
    Ahn, Dowon
    Stevens, Lynn M.
    Zhou, Kevin
    Page, Zachariah A.
    [J]. ADVANCED MATERIALS, 2021, 33 (44)
  • [5] Dimensional accuracy of FDM-printed polymer parts
    Akbas, Oguzhan Emre
    Hira, Onur
    Hervan, Sahar Zhiani
    Samankan, Shahrad
    Altinkaynak, Atakan
    [J]. RAPID PROTOTYPING JOURNAL, 2020, 26 (02) : 288 - 298
  • [6] Additive manufacturing of polymer nanocomposites: Needs and challenges in materials, processes, and applications
    Al Rashid, Ans
    Khan, Shoukat Alim
    Al-Ghamdi, Sami G.
    Koc, Muammer
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 14 : 910 - 941
  • [7] Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG's Mechanical Properties to FDM Printing Process Parameters
    Algarni, Mohammed
    Ghazali, Sami
    [J]. CRYSTALS, 2021, 11 (08)
  • [8] Mechanical, thermal, melt-flow and morphological characterizations of bentonite-filled ABS copolymer
    Alhallak, Laylay Mustafa
    Tirkes, Seha
    Tayfun, Umit
    [J]. RAPID PROTOTYPING JOURNAL, 2020, 26 (07) : 1305 - 1312
  • [9] Comparison of Type of Rubber in PLA/Rubber/Kenaf Biocomposite: Rheological, Mechanical and Morphological Properties
    Alias, Nur Fazreen
    Ismail, Hanafi
    Ishak, Ku Marsilla Ku
    [J]. MACROMOLECULAR SYMPOSIA, 2020, 391 (01)
  • [10] Alsoufi M.S., 2017, INT J MECH MECHATRON, V17, P7
12345678910