Rheological behaviour of the mushy zone and its effect on the formation of casting defects during solidification

被引：197

作者：

Dahle, AK ^{[1
]}

StJohn, DH ^{[1
]}

机构：

[1] Univ Queensland, Dept Min Minerals & Mat Engn, CRC Alloy & Solidificat Technol, Brisbane, Qld 4072, Australia

来源：

ACTA MATERIALIA | 1998年 / 47卷 / 01期

关键词：

D O I：

10.1016/S1359-6454(98)00342-5

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A new conceptual framework has been developed which explains the formation of shear-related casting defects such as porosity, segregation and tears. The theory relates defect formation to the mechanical behaviour of the partially solidified microstructure when shear stresses are developed during the filling of a casting and by the subsequent feeding processes during solidification. Two transition points, the dendrite coherency point and the maximum packing solid fraction, divide the mushy zone into three regions of different mechanical and feeding behaviours. The response of the mush to shear is related to the presence of these zones during solidification of a casting. The resulting defects are rationalized by considering the governing local shear stress and shear rate, local strength and time available for fluid flow. The design of the casting, the casting process used and the alloy composition all influence the relative importance of shearing on defect formation. (C) 1998 Acta Metallurgica Inc. Published by Elsevier Science Ltd. All rights reserved.

引用

页码：31 / 41

页数：11