The microstructures and anti-corrosion behavior of the thermal sprayed Hastelloy C276 coating on substrate of Q235 steel

被引：5
作者：
Kong, Yonghua [1 ]
Wang, Long [1 ]
Yin, Zhijian [2 ]
机构：
[1] Donghua Univ, Coll Mech Engn, Shanghai 201620, Peoples R China
[2] Shanghai SHEFEI Surface Sci & Technol Co Ltd, Shanghai 200090, Peoples R China
来源：
MATERIALS RESEARCH EXPRESS | 2019年 / 6卷 / 02期
关键词：
C276; alloy; thermal spray; coating; corrosion; thermal shock; PROCESSING MAP; C-276;
D O I：
10.1088/2053-1591/aaf2b6
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Hastelloy C276 coating was prepared on the substrate of Q235 steel by arc thermal spraying process. The microstructure, microhardness, thermal shock resistance and anti-corrosion of the coating were investigated. The coating exhibits a layered buildup structure with some pores and unmelted particles appearing. There is a distinct and rough interface between the coating and the substrate which increases the contact area between the coating and the substrate. The coating and the substrate were meshed to each other in the boundary, showing a strong bonding. The coating exhibited a strong thermal shock resistance with the substrate of Q235 steel at 600 degrees C. The microhardness of the surface of the coating is much higher than the microhardness of the surface of the substrate. Uniform corrosion method of laboratory semi-immersion test was used to test the corrosion resistance of C276 coating. The coating exhibited good corrosion resistance in concentrated HCl with a concentration of 36.5%.
引用
收藏
页数：8
相关论文
共 21 条
  • [1] Microstructure and hardness studies of the electron beam welded zone of Hastelloy C-276
    Ahmad, M
    Akhter, JI
    Akhtar, M
    Iqbal, M
    Ahmed, E
    Choudhry, MA
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2005, 390 (1-2) : 88 - 93
  • [2] Surface modification of Hastelloy C-276 by SiC addition and electron beam melting
    Ahmad, M
    Akhter, JI
    Iqbal, M
    Akhtar, M
    Ahmed, E
    Shaikh, MA
    Saeed, K
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2005, 336 (01) : 120 - 124
  • [3] Surface damages and tool wear mode in end milling of hastelloy-C276 under dry and wet conditions
    Al-Falahi, M.
    Fadaeifard, F.
    Al-Falahi, M. D. A.
    Bin Baharudin, B. T. H. T.
    Hong, T. S.
    [J]. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2016, 47 (12) : 1182 - 1192
  • [4] Quantitative evaluation of precautions on chemical tanker operations
    Arslan, Ozcan
    [J]. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 2009, 87 (02) : 113 - 120
  • [5] Structure and Corrosion Behavior of Arc-Sprayed Zn-Al Coatings on Ductile Iron Substrate
    Bonabi, Salar Fatoureh
    Ashrafizadeh, Fakhreddin
    Sanati, Alireza
    Nahvi, Saied Mehran
    [J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2018, 27 (03) : 524 - 537
  • [6] The anti-corrosion behavior under multi-factor impingement of Hastelloy C22 coating prepared by multilayer laser cladding
    Chen, Lin
    Bai, Shu-Lin
    [J]. APPLIED SURFACE SCIENCE, 2018, 437 : 1 - 12
  • [7] Global intermodal tank container management for the chemical industry
    Erera, AL
    Morales, JC
    Savelsbergh, M
    [J]. TRANSPORTATION RESEARCH PART E-LOGISTICS AND TRANSPORTATION REVIEW, 2005, 41 (06) : 551 - 566
  • [8] Improvement of wear resistance of Hastelloy C-276 through laser surface melting
    Hashim, M.
    Babu, K. E. Sarath Raghavendra
    Duraiselvam, Muthukannan
    Natu, Harshad
    [J]. MATERIALS & DESIGN, 2013, 46 : 546 - 551
  • [9] Improving the logistics of multi-compartment chemical tankers
    Jetlund, AS
    Karimi, IA
    [J]. COMPUTERS & CHEMICAL ENGINEERING, 2004, 28 (08) : 1267 - 1283
  • [10] Karimi IA, 2002, CHEM ENG PROG, V98, P32
123