The flow behavior and constitutive equations in isothermal compression of 7050 aluminum alloy

被引：137

作者：

Wu, B. ^{[1
]}

Li, M. Q. ^{[1
]}

Ma, D. W. ^{[1
]}

机构：

[1] Northwestern Polytech Univ, Sch Mat Sci & Engn, Xian 710072, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2012年 / 542卷

关键词：

7050 aluminum alloy; High temperature deformation; Flow stress; Microstructure; Constitutive equations; HOT DEFORMATION-BEHAVIOR; HIGH-TEMPERATURE; MICROSTRUCTURAL EVOLUTION; PREDICTION; STRESS; STRAIN; STEEL; WORKING; RATES;

D O I：

10.1016/j.msea.2012.02.035

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The flow behavior of 7050 aluminum alloy was investigated by means of isothermal compression tests. Isothermal compression of 7050 aluminum alloy was carried out on a Gleeble-1500 thermal simulation machine at the deformation temperatures ranging from 593 K to 743 K. the strain rates ranging from 0.01 s(-1) to 20.0 s(-1), and the height reductions of 30%, 50% and 70%. The characteristics of stress-strain curves are determined by the interaction of work hardening, dynamic recovery and dynamic recrystallization. The flow stress decreases with the increasing of deformation temperature and the decreasing of strain rate. The relationship between microstructure and processing parameters was analyzed. The constitutive equations for characterizing the flow behavior during the whole deformation process had been established, based on the experimental results and the kinetic analysis. The average relative error between the calculated and the experimental flow stress is 5.73%, which indicates that the constitutive equations can be used to predict the flow behavior of 7050 aluminum alloy accurately during high temperature deformation. (C) 2012 Elsevier B.V. All rights reserved.

引用

页码：79 / 87

页数：9

共 23 条

[1] Prediction of hot deformation behaviour of 10Cr-10Ni-5Mo-2Cu steel [J].

Abbasi, S. M. ;

Shokuhfar, A. .

MATERIALS LETTERS, 2007, 61 (11-12) :2523-2526

[2] COMPARATIVE HOT WORKABILITY OF 7012-ALLOY AND 7075-ALLOY AFTER DIFFERENT PRETREATMENTS [J].

CERRI, E ;

EVANGELISTA, E ;

FORCELLESE, A ;

MCQUEEN, HJ .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 197 (02) :181-198

[3] Constitutive behaviour of composites of AA6061 and alumina [J].

Davies, CHJ ;

Hawbolt, EB ;

Samarasekera, IV ;

Brimacombe, JK .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 70 (1-3) :244-251

[4] Influence of quench and heating rates on the ageing response of an Al-Zn-Mg-(Zr) alloy [J].

Deschamps, A ;

Brechet, Y .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 251 (1-2) :200-207

[5] Deformation behavior and microstructure evolution of 7050 aluminum alloy during high temperature deformation [J].

Hu, H. E. ;

Zhen, L. ;

Yang, L. ;

Shao, W. Z. ;

Zhang, B. Y. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 488 (1-2) :64-71

[6] Hot deformation behavior of 7150 aluminum alloy during compression at elevated temperature [J].

Jin, Nengping ;

Zhang, Hui ;

Han, Yi ;

Wu, Wenxiang ;

Chen, Jianghua .

MATERIALS CHARACTERIZATION, 2009, 60 (06) :530-536

[7] Superplastic behavior of a 7055 aluminum alloy [J].

Kaibyshev, R ;

Sakai, T ;

Musin, F ;

Nikulin, I ;

Miura, H .

SCRIPTA MATERIALIA, 2001, 45 (12) :1373-1380

[8] PREDICTION OF STEEL FLOW STRESSES AT HIGH-TEMPERATURES AND STRAIN RATES [J].

LAASRAOUI, A ;

JONAS, JJ .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1991, 22 (07) :1545-1588

[9]

[李俊鹏 Li Junpeng], 2009, [稀有金属, Chinese Journal of Rare Metals], V33, P318

[10] A set of microstructure-based constitutive equations in hot forming of a titanium alloy [J].

Li, Xiaoli ;

Li, Miaoquan .

JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2006, 13 (05) :435-441

← 1 2 3 →