Research on glass fiber/microcellular unsaturated polyester composites

被引：0

作者：

Zhao, Xueni ^{[1
]}

Wan, Wuyong ^{[1
]}

Ren, Wei ^{[1
]}

Zeng, Shanqi ^{[1
]}

Lei, Jing ^{[1
]}

Zhou, Bin ^{[1
]}

机构：

[1] Shaanxi Univ Sci & Technol, Coll Mech & Elect Engn, Xian 710021, Shaanxi, Peoples R China

来源：

ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3 | 2011年 / 52-54卷

关键词：

unsaturated polyester; glass fiber; microcell; cell density; impact strength; tensile strength-to-weight ratio; SUPERCRITICAL CARBON-DIOXIDE; FIBER COMPOSITES; PROPERTY;

D O I：

10.4028/www.scientific.net/AMM.52-54.1237

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Glass fiber/microcellular unsaturated polyester composites (GF/MCUP) were prepared using the supersaturated gas technology. Technological process included three stages. The effect of processing parameters on average cell size, cell density, impact strength and tensile strength was investigaed by orthogonal experiment. The results indicated that the major factor affecting them was the temperature in stage II (T-2). Under the optimizing processing condition, the average cell size of GF/MCUP was about 8 pm and the cell density was 1.57x10(9) cells/cm(3). It was found that impact strength of GF/MCUP increased 88.81 and 188.12 % than that of glass fiber/unsaturated polyester composites (GF/UP) and unsaturated polyester plastics (UP), respectively. The corresponding 16.56 and 69.25 % increase in tensile strength-to-weight ratio were gained over that of GF/UP and UP, respectively.

引用

页码：1237 / 1242

页数：6

共 50 条

[21] Behaviours of glass fibre/unsaturated polyester composites under seawater environment
Gu, Huang
MATERIALS & DESIGN, 2009, 30 (04): : 1337 - 1340
[22] Investigation of bamboo pulp fiber-reinforced unsaturated polyester composites
Qiu, Renhui
Liu, Wendi
Li, Kaichang
HOLZFORSCHUNG, 2015, 69 (08) : 967 - 974
[23] Mechanical properties of sugar palm yarn/woven glass fiber reinforced unsaturated polyester composites: effect of fiber loadings and alkaline treatment
Nurazzi, N. Mohd
Khalina, A.
Sapuan, S. M.
Ilyas, R. A.
POLIMERY, 2019, 64 (10) : 665 - 675
[24] DEVELOPMENT AND CHARACTERISATION OF THERMAL PROPERTIES OF HYBRID COMPOSITES FROM DATE PALM FIBER AND GLASS WOOL REINFORCED UNSATURATED POLYESTER
Altememy, Mustafa A.
Al-Gailani, Mohammed W. Muhieldeen
Yu, Lih J.
Hassan, Cik S.
Jaber, Hussein A.
JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2024, 19 (04): : 1401 - 1419
[25] Thermal Decomposition and Kinetic Study on Different Types of Glass Fiber/Unsaturated Polyester Pipe Waste
Saetiaw, Kaew
Atong, Duangduen
Sricharoenchaikul, Viboon
Aht-ong, Duangdao
PRICM 7, PTS 1-3, 2010, 654-656 : 2652 - +
[26] Mechanical Properties of Longitudinal Basalt/Woven-Glass-Fiber-reinforced Unsaturated Polyester-Resin Hybrid Composites
Sapuan, S. M.
Aulia, H. S.
Ilyas, R. A.
Atiqah, A.
Dele-Afolabi, T. T.
Nurazzi, M. N.
Supian, A. B. M.
Atikah, M. S. N.
POLYMERS, 2020, 12 (10) : 1 - 14
[27] Rheological, Dynamic Mechanical and Thermal Properties of Thermotropic Liquid Crystalline Polymer/Unsaturated Polyester/Glass Fiber Hybrid Composites
Wei, C.
Yu, X. B.
Lv, J.
Gong, Y. Y.
JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, 2008, 5 (08) : 1651 - 1655
[28] Dynamic Mechanical Properties and Thermal Properties of Longitudinal Basalt/Woven Glass Fiber Reinforced Unsaturated Polyester Hybrid Composites
Haris, Nur Izzah Nabilah
Ilyas, R. A.
Hassan, Mohamad Zaki
Sapuan, S. M.
Afdzaluddin, Atiqah
Jamaludin, Khairur Rijal
Zaki, Sheikh Ahmad
Ramlie, Faizir
POLYMERS, 2021, 13 (19)
[29] Impacts of molding pressure on performances of Kraft fiber reinforced unsaturated polyester composites
Lv, Xinying
Ma, Dieying
Song, Yongming
Gao, Zhenhua
ENVIRONMENTAL BIOTECHNOLOGY AND MATERIALS ENGINEERING, PTS 1-3, 2011, 183-185 : 2173 - 2177
[30] Effects of Initiator Level on Performances of Kraft Fiber Reinforced Unsaturated Polyester Composites
Gao, Zhenhua
Ma, Dieying
Lv, Xinying
Liu, Wenbo
ADVANCES IN BUILDING MATERIALS, PTS 1-3, 2011, 261-263 : 658 - 662

← 1 2 3 4 5 →