Determination method of high-temperature characteristics of iron-ore sintering based on n(Fe2O3)/n(CaO)

被引:3
作者
Yu, Zheng-wei [1 ]
Qian, Li-xin [1 ]
Long, Hong-ming [1 ,2 ]
Wang, Yi-fan [1 ]
Meng, Qing-min [1 ]
Chun, Tie-jun [1 ]
机构
[1] Anhui Univ Technol, Sch Met Engn, Maanshan 243002, Anhui, Peoples R China
[2] Anhui Univ Technol, Key Lab Met Emiss Reduct & Resources Recycling, Minist Educ, Maanshan 243002, Anhui, Peoples R China
基金
中国国家自然科学基金;
关键词
Iron-ore sintering; High-temperature characteristics; Liquid phase fluidity; Calcium ferrite; CaO addition amount; CALCIUM FERRITE; LIQUID-PHASE; BEHAVIOR; GANGUE; AL2O3;
D O I
10.1007/s42243-018-00223-5
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The high-temperature characteristics of iron ores play important roles in optimizing ore proportion of sintering, which are tested by using iron-ore fines and analytical reagent CaO as raw materials. Two calculation methods of CaO addition amount based on binary basicity (basicity method) and n(Fe2O3)/n(CaO) (mole ratio method), respectively, were employed to evaluate the liquid phase fluidity (LPF) and the capability of calcium ferrite formation (CCFF) of iron ores. The results show that the rule of LPF of iron ores under the mole ratio method is different from that with basicity method. The LPF measured by basicity method has a linear positive correlation with the SiO2 content, and there is no linear relationship between LPF and Al2O3 content or mass loss on ignition, which are inconsistent with the results of the previous study. And the results of CCFF with low SiO2 content (< 3 wt.%) or high SiO2 content (> 7 wt.%) based on basicity method cannot reflect the true CCFF. The mole ratio method could successfully solve this problem by reducing the effect of CaO addition amount changes caused by SiO2 content of iron ores.
引用
收藏
页码:1257 / 1264
页数:8
相关论文
共 50 条
[41]   Analysis of the surface characteristics of SiO2-Al2O3-CaO-ZnO-Na2O-based glass at heat-treatment temperature using Raman spectroscopy [J].
Kim, Dongchan ;
Kang, Seunggu .
JOURNAL OF CERAMIC PROCESSING RESEARCH, 2023, 24 (06) :926-934
[42]   Influence of dispersion method of LaF3 in ZrB2-based ceramics on high-temperature oxidation resistance [J].
Hu, Jing ;
Li, Qi ;
Xie, Jianliang ;
Liu, Peng ;
Jiang, Shaoliang ;
Wang, Xin ;
Yin, Liangjun ;
Zhang, Li ;
Lu, Haipeng ;
Zhang, Linbo ;
Deng, Longjiang .
CERAMICS INTERNATIONAL, 2021, 47 (12) :17560-17569
[43]   Insight into diffusion-rebonding of Nano-Al2O3 on Fe surface in high-temperature thermal energy storage system [J].
Li, Renwei ;
Chen, Qicheng ;
Zhang, Yingjin ;
Ding, Yulong .
APPLIED SURFACE SCIENCE, 2020, 530
[44]   Protonated carbon nitride induced hierarchically ordered Fe2O3/H-C3N4/rGO architecture with enhanced electrochemical sensing of nitrite [J].
Wang, Shuang ;
Liu, Maoxiang ;
He, Shanshan ;
Zhang, Shupeng ;
Lv, Xuchu ;
Song, Haiou ;
Han, Jun ;
Chen, Duozhe .
SENSORS AND ACTUATORS B-CHEMICAL, 2018, 260 :490-498
[45]   High-temperature dielectric and microwave absorption properties of Si3N4-SiC/SiO2 composite ceramics [J].
Li, Mian ;
Yin, Xiaowei ;
Zheng, Guopeng ;
Chen, Meng ;
Tao, Mingjie ;
Cheng, Laifei ;
Zhang, Litong .
JOURNAL OF MATERIALS SCIENCE, 2015, 50 (03) :1478-1487
[46]   Microstructure evolution of Si3N4 ceramics with high thermal conductivity by using Y2O3 and MgSiN2 as sintering additives [J].
Zhou, Miao ;
Liu, Yun ;
Li, Xiaolei ;
Sui, Tianyi ;
Su, Dong ;
Ji, Huiming .
CERAMICS INTERNATIONAL, 2023, 49 (16) :26331-26337
[47]   Effect of TiO2 Addition on Crystallization Characteristics of CaO-Al2O3-based Mould Fluxes for High Al Steel Casting [J].
Li, Jiangling ;
Shu, Qifeng ;
Hou, Xinmei ;
Chou, Kuochih .
ISIJ INTERNATIONAL, 2015, 55 (04) :830-836
[48]   Effect of MgO and Fe2O3 dual sintering aids on the microstructure and electrochemical performance of the solid state Gd0.2C0.8O2-δ electrolyte in intermediate-temperature solid oxide fuel cells [J].
Liang, Qingwen ;
Tang, Ping ;
Zhou, Jing ;
Bai, Jinghe ;
Tian, Dan ;
Zhu, Xiaofei ;
Zhou, Defeng ;
Wang, Ning ;
Yan, Wenfu .
FRONTIERS IN CHEMISTRY, 2022, 10
[49]   Effect of sintering temperature on nonlinearity and surge degradation characteristics of Mn3O4/Nb2O5/Er2O3-doped ZnO-V2O5-based varistors [J].
Nahm, Choon-W .
JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2020, 57 (01) :65-72
[50]   High-temperature corrosion of a Si3N4/W composite exposed to molten MgCl2-NaCl-KCl salts [J].
Wu, Yueqi ;
Jia, Mingyong ;
Huang, Zhifeng ;
Shen, Qiang ;
Chen, Fei .
CORROSION SCIENCE, 2024, 230