Rambutan (Nephelium lappaceum) kernel olein as a non-hydrogenated fat component for developing model non-dairy liquid creamer: effect of emulsifier concentration, sterilization, and pH

In this work, the effects of the emulsifier concentration, sterilization process, and pH on the properties and stability of the model liquid creamer were evaluated. Applying diacetyl tartaric acid ester of mono- and diglycerides or DATEM at a concentration of 0.3% (w/w) in the presence of 2% (w/w) sodium caseinate produced stable model liquid creamers (10% (w/w) rambutan kernel olein) with a small particle size (Z-average approximate to 200 nm) and a narrow size distribution range (PDI < 0.24). These creamers were stable regarding creaming and coalescence, having non-flocculated particles and a constant flow behavior index (n) after sterilization using autoclaving (121 degrees C, 1.1 bar for 15 min) and during storage for 150 days at 25 degrees C. The model liquid creamers were unstable at pH values near the isoelectric point of caseinate (pH 4-5). However, these were stable after mixing with hot coffee solutions based on no observed feathering or sedimentation. The whitening performance of the model liquid creamers compared well with commercial ones. Non-hydrogenated fat-based model non-dairy liquid creamer was successfully formulated using rambutan kernel olein as a fat component. The results obtained in this study are useful for the possible application of fractionated rambutan kernel fat in food products.