Experimental Investigation on Warm Deep Drawing of Stainless Steel AISI 304

被引：10

作者：

Ethiraj, N. ^{[1
]}

Senthilkumar, V. S. ^{[1
]}

机构：

[1] Anna Univ, Coll Engn, Dept Mech Engn, Madras 600025, Tamil Nadu, India

来源：

ADVANCED MECHANICAL ENGINEERING, PTS 1 AND 2 | 2010年 / 26-28卷

关键词：

Deep Drawing; Warm working; Drawability; Stainless steel; FINITE-ELEMENT SIMULATION; SHEET; ALLOY;

D O I：

10.4028/www.scientific.net/AMM.26-28.436

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Deep drawing is one of the most widely used metal forming process to produce sheet metal parts especially in automobile industries. Warm working is the plastic deformation of metal at temperatures below the temperature range for recrystallization and above the room temperature. In this investigation, 1.0mm thick circular specimen of stainless steel AISI 304 were warm deep drawn and the influence of temperature on the deformation behaviour of material and the drawing loads which is required to draw the component was studied. The results show that the warm working has positive effects like reduced drawing load, negligible amount of increase in thinning and thickening of a drawn component when compared to the conventional drawing and also there is no necking or cracking occurs due to the temperature influence

引用

页码：436 / 442

页数：7

共 12 条

[1]

ASTME, 1965, FUNDAMENTALS TOOL DE, P248

[2] 3D finite element simulation of deep drawing with damage development [J].

Fan, J. P. ;

Tang, C. Y. ;

Tsui, C. P. ;

Chan, L. C. ;

Lee, T. C. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (09) :1035-1044

[3] Experimental and analytical studies for forming limit of AZ31 alloy on warm sheet metal forming [J].

Lee, Y. S. ;

Kim, M. C. ;

Kim, S. W. ;

Kwon, Y. N. ;

Choi, S. W. ;

Lee, J. H. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 (103-107) :103-107

[4] Tool temperature control to increase the deep drawability of aluminum 1050 sheet [J].

Moon, YH ;

Kang, YK ;

Park, JW ;

Gong, SR .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2001, 41 (09) :1283-1294

[5] WRINKLING OF SHEET METALS WHEN DRAWING THROUGH A CONICAL DIE [J].

NARAYANASAMY, R ;

SOWERBY, R .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1994, 41 (03) :275-290

[6]

NARAYANASAMY R, 2005, J MAT DESIGN, V28, P904

[7]

oster gaard D.Eugene, 1967, ADV DIE MAKING, P129

[8] Numerical and experimental investigations on the Warm Deep Drawing process of circular aluminum alloy specimens [J].

Palumbo, G. ;

Tricarico, L. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 184 (1-3) :115-123

[9] Experimental and numerical study of warm deep drawing of AZ31 magnesium alloy sheet [J].

Qun-Feng Chang ;

Da-Yong Li ;

Ying-Hong Peng ;

Xiao-Qin Zeng .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (3-4) :436-443

[10] FINITE-ELEMENT SIMULATION OF DEEP DRAWING OF STAINLESS-STEEL SHEET WITH DEFORMATION-INDUCED TRANSFORMATION [J].

SHINAGAWA, K ;

MORI, KI ;

OSAKADA, K .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1991, 27 (1-3) :301-310

← 1 2 →