Experiment Study on Friction Behaviour of Ti-6Al-4V Alloy for Hot-working

被引：0
|
作者：
Li, Fan [1 ]
Guo, Jia [1 ]
Zhang, Wen-Xiang [1 ]
Cao, Jun [1 ]
Lin, Yu-Tong [1 ]
Zhou, Ce [1 ]
Li, Fu-Guo [1 ]
机构：
[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Sch Mat Sci & Engn, Xian 710072, Shaanxi, Peoples R China
来源：
PROCEEDINGS OF THE 3RD ANNUAL INTERNATIONAL CONFERENCE ON MECHANICS AND MECHANICAL ENGINEERING (MME 2016) | 2017年 / 105卷
关键词：
Ti-6Al-4V alloy; Coefficient of friction; Orthogonal test; Friction mechanism; Abrasive wear; COEFFICIENT; TEMPERATURE;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The friction behaviour between blank and die plays an important role in the precision forging process. Hence, the friction behaviour between Ti-6Al-4V alloy and K15 is studied to analyse the friction mechanism and characterization. The significant differences and influence law of temperature, sliding velocity and normal load on coefficient of friction (CoF) were studied through orthogonal tests. The range analysis and analysis of variance show that CoF is affected by normal load most, followed by sliding velocity and temperature. The worn-out appearances and composition analysis show that friction mechanism converts from dry friction to viscous or shear friction under a certain condition.
引用
收藏
页码：543 / 551
页数：9
相关论文
共 50 条
  • [1] Isothermal and thermomechanical fatigue behaviour of Ti-6Al-4V titanium alloy
    Prasad, Kartik
    Kumar, Vikas
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (19-20): : 6263 - 6270
  • [2] Study on the Hot Processing Parameters-Impact Toughness Correlation of Ti-6Al-4V Alloy
    Xiaohui Shi
    Weidong Zeng
    Yu Sun
    Yuanfei Han
    Yongqing Zhao
    Journal of Materials Engineering and Performance, 2016, 25 : 1741 - 1748
  • [3] Study on the Hot Processing Parameters-Impact Toughness Correlation of Ti-6Al-4V Alloy
    Shi, Xiaohui
    Zeng, Weidong
    Sun, Yu
    Han, Yuanfei
    Zhao, Yongqing
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (05) : 1741 - 1748
  • [4] Improving ductility of Ti-6Al-4V alloy via rotational hot rolling
    Wang, Shuaizhuo
    Hu, Zhaohua
    Zeng, Wang
    Huang, Jiaxi
    Xiao, Lirong
    Zhou, Hao
    VACUUM, 2021, 191
  • [5] Oscillating and unidirectional sliding wear behaviour of cold sprayed Ti-6Al-4V coating on Ti-6Al-4V substrate
    Sirvent, P.
    Garrido, M. A.
    Lozano-Perez, S.
    Poza, P.
    SURFACE & COATINGS TECHNOLOGY, 2020, 382
  • [6] Experiment and numerical study of chip formation mechanism during cryogenic machining of Ti-6Al-4V alloy
    Wang, Yongqing
    Li, Jianming
    Liu, Kuo
    Jiang, Shaowei
    Zhao, Di
    Wang, Siqi
    Yang, Yuebing
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 84 : 1246 - 1257
  • [7] Machinability study of Ti-6Al-4V alloy using solid lubricant
    Parida, Asit Kumar
    Rao, Paruchuri Venkatswar
    Ghosh, Sudarsan
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2020, 45 (01):
  • [8] Hot deformation behavior and dynamic recrystallization of melt hydrogenated Ti-6Al-4V alloy
    Wang, Xuan
    Wang, Liang
    Luo, LiangShun
    Liu, XiaoDong
    Tang, YingChun
    Li, XinZhong
    Chen, RuiRun
    Su, YanQing
    Guo, JingJie
    Fu, HengZhi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 728 : 709 - 718
  • [9] HOT-DEFORMATION BEHAVIOR OF HOT ISOSTATIC PRESSED Ti-6Al-4V ALLOY DURING HOT COMPRESSION
    Liu, Haijun
    Zhang, Zhimin
    Xu, Kaihua
    Zhang, Jishi
    Xue, Yong
    Wang, Qiang
    MATERIALI IN TEHNOLOGIJE, 2021, 55 (04): : 559 - 570
  • [10] THE ROUGHNESS IN THE DIFFUSION WELDING OF TI-6AL-4V ALLOY
    ANDRZEJEWSKI, H
    BADAWI, KF
    ROLLAND, B
    WELDING JOURNAL, 1993, 72 (09) : S435 - S439
12345