Analysis and Reduction of Cogging Torque in Dual PM Vernier Machine with Irregular Split Teeth

被引：1

作者：

Huang, Hailin ^{[1
]}

Li, Dawei ^{[1
]}

Ren, Xiang ^{[1
]}

Qu, Ronghai ^{[1
]}

机构：

[1] Huazhong Univ Sci & Technol, State Key Lab Adv Electromagnet Engn & Tech, Wuhan, Peoples R China

来源：

2021 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC) | 2021年

基金：

中国国家自然科学基金;

关键词：

Cogging torque; dual PM vernier machine; flux modulation effect; magnet contour; DESIGN;

D O I：

10.1109/IEMDC47953.2021.9449510

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper investigates the performances of dual PM split tooth vernier machines (DP-STVMs). It has been proved that by adjusting the distribution of stator auxiliary teeth, the flux modulation effect and no-load back EMF of DP-STVMs can be enhanced. However, this irregular structure also changes the periodicity and increases the amplitude of cogging torque. To investigate the source of cogging torque in DP-STVMs, an analytical method based on airgap fields and Maxwell stress tenser method is used, which can easily present the contribution of each airgap field component to the cogging torque. Based on the analysis, novel cogging torque reduction methods are proposed in this paper. Compared to regular rotor skewing method, the proposed methods can achieve better suppression effect on cogging torque and less reduction on no-load back EMF.

引用

页数：8

共 23 条

[11]

Li Y, 2018, 2018 XIII INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), P2430, DOI 10.1109/ICELMACH.2018.8507233

[12]

Liu Y., 2018, 2018 IEEE International Magnetics Conference (INTERMAG), DOI 10.1109/INTMAG.2018.8508085

[13] A Novel Stator and Rotor Dual PM Vernier Motor With Space Vector Pulse Width Modulation [J].

Niu, Shuangxia ;

Ho, S. L. ;

Fu, W. N. .

IEEE TRANSACTIONS ON MAGNETICS, 2014, 50 (02) :805-808

[14]

Toba A., 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370), P2539, DOI 10.1109/IAS.1999.799197

[15] Generic torque-maximizing design methodology of surface permanent-magnet vernier machine [J].

Toba, A ;

Lipo, TA .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2000, 36 (06) :1539-1546

[16] Design Optimization and Comparative Study of Novel Dual-PM Excited Machines [J].

Wang, Qingsong ;

Niu, Shuangxia ;

Yang, Lin .

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2017, 64 (12) :9924-9933

[17] A Novel Permanent Magnet Vernier Machine With Halbach Array Magnets in Stator Slot Opening [J].

Xie, Kangfu ;

Li, Dawei ;

Qu, Ronghai ;

Gao, Yuting .

IEEE TRANSACTIONS ON MAGNETICS, 2017, 53 (06)

[18] Hybrid Stator Design of Fault-Tolerant Permanent-Magnet Vernier Machines for Direct-Drive Applications [J].

Xu, Liang ;

Liu, Guohai ;

Zhao, Wenxiang ;

Yang, Xinyu ;

Cheng, Ran .

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2017, 64 (01) :179-190

[19] Analytical calculation of magnetic field distribution in the slotted air gap of a surface permanent-magnet motor using complex relative air-gap permeance [J].

Zarko, D ;

Ban, D ;

Lipo, TA .

IEEE TRANSACTIONS ON MAGNETICS, 2006, 42 (07) :1828-1837

[20] Analytical solution for cogging torque in surface permanent-magnet motors using conformal mapping [J].

Zarko, Damir ;

Ban, Drago ;

Lipo, Thomas A. .

IEEE TRANSACTIONS ON MAGNETICS, 2008, 44 (01) :52-65

← 1 2 3 →