Design a Novel Target to Improve Positioning Accuracy of Autonomous Vehicular Navigation System in GPS Denied Environments

被引:35
作者
Liu, Wanli [1 ]
Li, Zhixiong [2 ,3 ]
Sun, Shuaishuai [4 ]
Gupta, Munish Kumar [5 ]
Du, Haiping [6 ]
Malekian, Reza [7 ]
Sotelo, Miguel Angel [8 ]
Li, Weihua [6 ]
机构
[1] China Univ Min & Technol, Sch Mech & Elect Engn, Xuzhou 221116, Jiangsu, Peoples R China
[2] Ocean Univ China, Sch Engn, Qingdao 266100, Peoples R China
[3] Yonsei Univ, Yonsei Frontier Lab, Seoul 03722, South Korea
[4] Univ Sci & Technol China, Dept Precis Machinery & Instrumentat, Key Lab Mech Behav & Design Mat, Hefei 230027, Anhui, Peoples R China
[5] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China
[6] Univ Wollongong, Sch Mech Mat Mechatron & Biomed Engn, Wollongong, NSW 2522, Australia
[7] Malmo Univ, Dept Comp Sci & Media Technol, S-20506 Malmo, Sweden
[8] Univ Alcala, Dept Comp Engn, Madrid 28801, Spain
基金
中国国家自然科学基金; 国家重点研发计划;
关键词
Global Positioning System; Trajectory; Three-dimensional displays; Shape; Measurement uncertainty; Measurement by laser beam; Location awareness; Autonomous vehicular navigation system (AVNS); positioning accuracy; global position system (GPS) denied environments; LIDAR; CALIBRATION; MODEL;
D O I
10.1109/TII.2021.3052529
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
Accurate positioning is an essential requirement of autonomous vehicular navigation system (AVNS) for safe driving. Although the vehicle position can be obtained in global position system friendly environments, in GPS denied environments (such as suburb, tunnel, forest, or underground scenarios) the positioning accuracy of AVNS is easily reduced by the trajectory error of the vehicle. In order to solve this problem, the plane, sphere, cylinder and cone are often selected as the ground control targets to eliminate the trajectory error for AVNS. However, these targets usually suffer from the limitations of incidence angle, measuring range, scanning resolution, and point cloud density, etc. To bridge this research gap, an adaptive continuum shape constraint analysis (ACSCA) method is presented in this article to design a new target with optimized identifiable specific shape to eliminate the trajectory error for AVNS. First of all, according to the proposed ACSCA method, we conduct extensive numerical simulations to explore the optimal ranges of the vertexes and the faces for target shape design, and based on these trials, the optimal target shape is found as icosahedron, which composes of ten vertexes, 20 faces and combines the properties of plane and volume target. Moreover, the algorithm of automatic detection and coordinate calculation is developed to recognize the icosahedron target and calculate its coordinates information for AVNS. Finally, a series of experimental investigation were performed to evaluate the effectiveness of the designed icosahedron target in GPS denied environments. The experimental results demonstrate that compared with the plane, sphere, cylinder and cone targets, the developed icosahedron target can produce better performances than the above targets in terms of the clustered minimum registration error, ambiguity and range of field-of-view; also can significantly improve the positioning accuracy of AVNS in GPS denied environments.
引用
收藏
页码:7575 / 7588
页数:14
相关论文
共 30 条
[1]  
Ahmed A.H.Q., 2018, THESIS CALIFORNIA ST THESIS CALIFORNIA ST
[2]   An Overview of Nature-Inspired, Conventional, and Hybrid Methods of Autonomous Vehicle Path Planning [J].
Ayawli, Ben Beklisi Kwame ;
Chellali, Ryad ;
Appiah, Albert Yaw ;
Kyeremeh, Frimpong .
JOURNAL OF ADVANCED TRANSPORTATION, 2018,
[3]   Effect of target color and scanning geometry on terrestrial LiDAR point-cloud noise and plane fitting [J].
Bolkas, Dimitrios ;
Martinez, Aaron .
JOURNAL OF APPLIED GEODESY, 2018, 12 (01) :109-127
[4]   Simulating vehicle dynamics on both design plans and laser-scanned road geometry to guide highway design policy [J].
Brown, Alexander ;
Brennan, Sean .
TRANSPORTATION RESEARCH PART C-EMERGING TECHNOLOGIES, 2015, 50 :28-36
[5]  
Chan T.O., 2015, THESIS U CALGARY CAL THESIS U CALGARY CAL
[6]   A rigorous cylinder-based self-calibration approach for terrestrial laser scanners [J].
Chan, Ting On ;
Lichti, Derek D. ;
Belton, David .
ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING, 2015, 99 :84-99
[7]   Centimeter-Grade Metropolitan Positioning for Lane-Level Intelligent Transportation Systems Based on the Internet of Vehicles [J].
Chen, Lien-Wu ;
Ho, Yu-Fan .
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 2019, 15 (03) :1474-1485
[8]   Adaptive random sample consensus approach for segmentation of building roof in airborne laser scanning point cloud [J].
Dal Poz, Aluir P. ;
Yano Ywata, Michelle S. .
INTERNATIONAL JOURNAL OF REMOTE SENSING, 2020, 41 (06) :2047-2061
[9]   Object Classification Using CNN-Based Fusion of Vision and LIDAR in Autonomous Vehicle Environment [J].
Gao, Hongbo ;
Cheng, Bo ;
Wang, Jianqiang ;
Li, Keqiang ;
Zhao, Jianhui ;
Li, Deyi .
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 2018, 14 (09) :4224-4231
[10]   Feature Detection for Vehicle Localization in Urban Environments Using a Multilayer LIDAR [J].
Hata, Alberto Y. ;
Wolf, Denis F. .
IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS, 2016, 17 (02) :420-429