Performance analysis of solar air heater with jet impingement on corrugated absorber plate

被引：104

作者：

Aboghrara, Alsanossi M. ^{[1
,3
]}

Baharudin, B. T. H. T. ^{[1
]}

Alghoul, M. A. ^{[2
]}

Adam, Nor Mariah ^{[1
]}

Hairuddin, A. A. ^{[1
]}

Hasan, Husam A. ^{[2
]}

机构：

[1] Univ Putra Malaysia, Fac Engn, Mech Dept, Serdang 43400, Selangor, Malaysia

[2] UKM, Solar Energy Res Inst, Bangi 43600, Selangor, Malaysia

[3] Univ Sebha, Fac Sci Traghen, Phys Dept, Sabha, Libya

来源：

CASE STUDIES IN THERMAL ENGINEERING | 2017年 / 10卷

关键词：

Solar air heater; Jet impingement; Corrugated plat; Outlet temperature; Efficiency; DESIGN;

D O I：

10.1016/j.csite.2017.04.002

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This paper deals with the experimental investigation outlet temperature and efficiency, of Solar Air heater (SAH). The experimental test set up designed and fabricated to study the effect of jet impingement on the corrugated absorber plate, through circular jets in a duct flow of solar air heater, and compared with conventional solar air heater on flat plat absorber. Under effect of mass flow rate ((m) over dot) of air and solar radiation on outlet air temperature, and efficiency, are analyzed. Results show the flow jet impingement on corrugated plat absorber is a strong function of heat transfer enhancement. The present investigation concludes that the mass flow rate of air substantially influences the heat transfer on solar air heaters. And the thermal efficiency of proposed design duct is observed almost 14% more as compare to the smooth duct. M solar radiation 500-1000 (W/M-2), 308 K ambient temperature and 0.01-0.03 (K-g/S) mass flow rate

引用

页码：111 / 120

页数：10

共 50 条

[21] Analytical investigation of jet impingement solar air heater with dimple-roughened absorber surface via thermal and effective analysis
Salman, Mohammad
Chauhan, Ranchan
Poongavanam, Ganesh Kumar
Kim, Sung Chul
RENEWABLE ENERGY, 2022, 199 : 1248 - 1257
[22] Performance improvement of a solar air heater by covering the absorber plate with a thin porous material
Jouybari, Nima Fallah
Lundstrom, T. Staffan
ENERGY, 2020, 190
[23] Performance evaluation of solar air heater having expanded metal mesh as artificial roughness on absorber plate
Gupta, M. K.
Kaushik, S. C.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2009, 48 (05) : 1007 - 1016
[24] Effect of channel depth ratio and absorber plate configuration on performance of a solar air heater
Patel, Vijay
Judal, K. B.
Sharma, Kamal
Rosen, Marc A.
Kumar, Abhinav
Mumtaz, Mohd Aamir
Elgamal, Mohamed H.
Farouk, Mohamed I.
Malik, Ishfaq
CASE STUDIES IN THERMAL ENGINEERING, 2024, 61
[25] Energy and exergy analyses of a solar air heater with wire mesh-covered absorber plate
Devecioglu, Atilla G.
Oruc, Vedat
Tuncer, Zafer
INTERNATIONAL JOURNAL OF EXERGY, 2018, 26 (1-2) : 3 - 20
[26] Performance of Solar Air Heater Having Absorber Plate Roughened with Protrusions of Different Shapes
Soi, Aman
Singh, Ranjit
Bhushan, Brij
PROCEEDINGS OF 2019 IEEE 2ND INTERNATIONAL CONFERENCE ON RENEWABLE ENERGY AND POWER ENGINEERING (REPE 2019), 2019, : 177 - 181
[27] Performance enhancement of solar air heater by attaching artificial rib roughness on the absorber Plate
Yadav, Anil Singh
Gupta, Shaman
Agrawal, Abhay
Saxena, Rajiv
Agrawal, Naveen
Nashine, Sachi
MATERIALS TODAY-PROCEEDINGS, 2022, 63 : 706 - 717
[28] Experimental Studies on a Solar Air Heater Having V-Corrugated Absorber Plate with Obstacles Bent Vertically
Handoyo, Ekadewi A.
Ichsani, Djatmiko
Prabowo
Sutardi
ADVANCES IN APPLIED MECHANICS AND MATERIALS, 2014, 493 : 86 - 92
[29] Design and optimization of a solar air heater with offset strip fin absorber plate
Yang, Ming
Yang, Xudong
Li, Xing
Wang, Zhifeng
Wang, Pengsu
APPLIED ENERGY, 2014, 113 : 1349 - 1362
[30] Multi-objective optimization of solar air heater with obstacles on absorber plate
Kulkami, Kishor
Afzal, Arshad
Kim, Kwang-Yong
SOLAR ENERGY, 2015, 114 : 364 - 377

← 1 2 3 4 5 →