A study of p-xylylene polymerization kinetics using high-vacuum in situ differential scanning calorimetry

被引:9
作者
Streltsov, Dmitry R. [1 ,2 ]
Buzin, Alexander I. [1 ]
Dmitryakov, Petr V. [2 ]
Karnasa, Pawel [3 ]
Ivanov, Dimitri A. [4 ,5 ]
Chvalun, Sergei N. [1 ,2 ]
机构
[1] Russian Acad Sci, Enikolopov Inst Synthet Polymer Mat, 70 Ul Profsoyuznaya, Moscow 117393, Russia
[2] Kurchatov Inst, Natl Res Ctr, 1 Pl Akad Kurchatova, Moscow 123182, Russia
[3] Hungarian Acad Sci, Res Inst Solid State Phys & Opt, Wigner Res Ctr Phys, POB 49, H-1125 Budapest, Hungary
[4] CNRS, UMR 7361, Inst Sci Mat Mulhouse, 15 Rue Jean Starcky, F-68057 Mulhouse, France
[5] Lomonosov Moscow State Univ MSU, Fac Fundamental Phys & Chem Engn, GSP-1,1 Leninskie Gory, Moscow 119991, Russia
基金
俄罗斯基础研究基金会;
关键词
Poly(p-xylylene); Vapor deposition polymerization; Isoconversional methods; Reaction model; LOW-TEMPERATURE; MODEL-FREE; PARYLENE; POLY(P-XYLYLENE); CRYSTALLIZATION; PROTECTION; DEPOSITION; COATINGS; STEEL; FILMS;
D O I
10.1016/j.tca.2016.09.016
中图分类号
O414.1 [热力学];
学科分类号
摘要
The polymerization kinetics of p-xylylene in condensed state was studied by in situ non-isothermal DSC measurements, using a custom-made heat-flux calorimeter integrated into a vacuum vapor deposition polymerization reactor. The temperature range (-110 to -75 degrees C) and the total heat effect (Q = 86 +/- 8 kJ mol(-1)) of the polymerization reaction were found to be almost identical to the values previously measured ex situ with a commercial Perkin Elmer DSC7 calorimeter. The differential isoconversional method by Friedman was applied for the kinetics analysis. The effective activation energy exhibits variation with the degree of conversion in the range from 30 kJ mol(-1) to 50 kJ mol(-1) indicating the complexity of the reaction mechanism. To evaluate the reaction model f(alpha) a model-free method based on the use of the compensation effect has been employed. The calculated f(alpha) values are adequately fitted to the Avrami-Erofeev A2 model in the conversion degrees interval of 20-80%. The discrepancy observed at the end of the reaction is probably due to diffusion control of the reaction, whereas the complexity of the reaction mechanism can be a reason of the discrepancy at low degrees of conversion. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:65 / 72
页数:8
相关论文
共 41 条
[1]  
Aleksandrova L., 1993, POLYM SCI, V35, P435
[2]  
[Anonymous], 2015, ISOCONVERSIONAL KINE, DOI [DOI 10.1007/978-3-319-14175-6, 10.1007/978-3-319-14175-6]
[3]   Transparent and flexible carbon nanotube transistors [J].
Artukovic, E ;
Kaempgen, M ;
Hecht, DS ;
Roth, S ;
GrUner, G .
NANO LETTERS, 2005, 5 (04) :757-760
[4]   Model-free deconvolution of femtosecond kinetic data [J].
Banyasz, Akos ;
Keszei, Erno .
JOURNAL OF PHYSICAL CHEMISTRY A, 2006, 110 (19) :6192-6207
[5]  
Beach W.F., 2004, Encycl. Polym. Sci. Technol, DOI DOI 10.1002/0471440264.PST405
[6]   Cell and protein compatibility of parylene-C surfaces [J].
Chang, Tracy Y. ;
Yadav, Vikramaditya G. ;
De Leo, Sarah ;
Mohedas, Agustin ;
Rajalingam, Birnal ;
Chen, Chia-Ling ;
Selvarasah, Selvapraba ;
Dokmeci, Mehmet R. ;
Khademhosseini, Ali .
LANGMUIR, 2007, 23 (23) :11718-11725
[7]   Improvements of permeation barrier coatings using encapsulated parylene interlayers for flexible electronic applications [J].
Chen, Tsai-Ning ;
Wuu, Dong-Sing ;
Wu, Chia-Cheng ;
Chiang, Cheng-Chung ;
Chen, Yung-Pei ;
Horng, Ray-Hua .
PLASMA PROCESSES AND POLYMERS, 2007, 4 (02) :180-185
[8]   Silane-parylene coating for improving corrosion resistance of stainless steel 316L implant material [J].
Cieslik, Monika ;
Engvall, Klas ;
Pan, Jinshan ;
Kotarba, Andrzej .
CORROSION SCIENCE, 2011, 53 (01) :296-301
[9]   THE CHEMISTRY OF XYLYLENES .6. THE POLYMERIZATION OF PARA-XYLYLENE [J].
ERREDE, LA ;
GREGORIAN, RS ;
HOYT, JM .
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 1960, 82 (19) :5218-5223
[10]  
FRIEDMAN HL, 1964, J POLYM SCI POL SYM, P183