Collapse of Sharp-Notched 6061-T6 Aluminum Alloy Tubes Under Cyclic Bending

The mechanical behavior and buckling failure of sharp-notched 6061-T6 aluminum alloy tubes with different notch depths subjected to cyclic bending are experimentally and theoretically investigated. The experimental moment-curvature relationship exhibits an almost steady loop from the beginning of the first cycle. However, the ovalization-curvature relationship exhibits a symmetrical, increasing, and ratcheting behavior as the number of cycles increases. The six groups of tubes tested have different notch depths, from which two different trends can be observed from the relationship between the controlled curvature and the number of cycles required to ignite buckling. Finite element software ANSYS is used to simulate the moment-curvature and ovalization-curvature relationships. Additionally, a theoretical model is proposed for simulation of the controlled curvature-number of cycles concerning the initiation of buckling. Simulation results are compared with experimental test data, which shows generally good agreement.