A ball head positioning method based on hybrid force-position control

被引:7
作者
Chu, Wenmin [1 ]
Huang, Xiang [1 ]
Li, Shuanggao [1 ]
Lou, Peihuang [1 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Peoples R China
关键词
Aircraft assembly; ball joint; large component; hybrid force-position control; ball head positioning; LARGE AIRCRAFT COMPONENT; UNCERTAINTIES EVALUATION; ADJUSTMENT;
D O I
10.1177/0959651820987903
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
In the digital aircraft assembly system, the large component of aircraft is connected with the numerical control locator through a ball joint composed of a ball head and a ball socket. To ensure the posture adjustment accuracy of large component of aircraft, the clearance between the ball head and the ball socket is very small. Therefore, it is very difficult to accurately guide the ball head of large component of aircraft into the ball socket of the numerical control locator. Aiming at this problem, this article proposes a ball head positioning method based on hybrid force-position control, so that the ball socket can approach the ball head adaptively. First, according to the technical characteristics of the ball head positioning, the axes of the numerical control locator are divided into position control axis and force control axis, and the conditions to ensure the safety of ball head positioning are analyzed. Then the control model of ball head positioning based on hybrid force-position control is established and simulated by Simulink. Finally, a simulated posture adjustment system is built in the laboratory, and a series of ball head positioning experiments based on hybrid force-position control are carried out. The experimental results show that, compared with the traditional ball head positioning method, the ball head positioning process based on hybrid force-position control is more stable and faster, and the method can significantly reduce the lateral force. Moreover, the proposed method can be easily integrated into the existing posture adjustment system without additional hardware cost.
引用
收藏
页码:1433 / 1444
页数:12
相关论文
共 27 条
  • [1] Multi load-transmitting device based support layout optimization for large fuselage panels in digital assembly
    Bi, Yunbo
    Yan, Weimiao
    Ke, Yinglin
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2015, 229 (10) : 1792 - 1804
  • [2] Chang J, 2017, IEEE ANN INT CONF CY, P645, DOI 10.1109/CYBER.2017.8446183
  • [3] Cabin posture adjustment method based on redundant constrained parallel mechanism
    Chu, Wenmin
    Huang, Xiang
    Li, Shuanggao
    [J]. ASSEMBLY AUTOMATION, 2020, 40 (03) : 377 - 386
  • [4] On-line calibration and uncertainties evaluation of spherical joint positions on large aircraft component for zero-clearance posture alignment
    Deng, Zhengping
    Huang, Xiang
    Li, Shuanggao
    Xing, Hongwen
    [J]. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2019, 56 : 38 - 54
  • [5] Uncertainties evaluation of coordinate transformation parameters in the large-scale measurement for aircraft assembly
    Deng, Zhengping
    Li, Shuanggao
    Huang, Xiang
    [J]. SENSOR REVIEW, 2018, 38 (04) : 542 - 550
  • [6] Ding GB, 2015, 2015 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, P1561, DOI 10.1109/ICMA.2015.7237717
  • [7] Measurement Assisted Assembly for High Accuracy Aerospace Manufacturing
    Drouot, Adrien
    Zhao, Ran
    Irving, Lucas
    Sanderson, David
    Ratchev, Svetan
    [J]. IFAC PAPERSONLINE, 2018, 51 (11): : 393 - 398
  • [8] A self-adaptive alignment strategy for large components based on dynamic compliance center
    Du, Fuzhou
    Wen, Ke
    Yu, Hao
    [J]. ASSEMBLY AUTOMATION, 2019, 39 (02) : 345 - 355
  • [9] Estimating 3-D rigid body transformations: A comparison of four major algorithms
    Eggert, DW
    Lorusso, A
    Fischer, RB
    [J]. MACHINE VISION AND APPLICATIONS, 1997, 9 (5-6) : 272 - 290
  • [10] HOGAN N, 1985, J DYN SYST-T ASME, V107, P8, DOI 10.1115/1.3140713