Vibration analysis of a Ni-Ti shape memory alloy rod

被引：0

作者：

Ghazinejad, M. ^{[1
]}

Shokuhfar, A. ^{[2
]}

机构：

[1] Iran Univ Sci & Technol, Dept Mech Engn, Tehran, Iran

[2] Toosi Univ Technol, Mat Sci Lab, Tehran, Iran

来源：

DIFFUSION IN SOLIDS AND LIQUIDS: HEAT TRANSFER - MICROSTRUCTURE & PROPERTIES | 2007年 / 553卷

关键词：

stress induced martensite; shape memory alloys; superelasticity; dynamic behavior; finite elements;

D O I：

10.4028/www.scientific.net/MSF.553.164

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper the effect of stress induced phase transformation on the vibration response of SMA structures has been studied. To this end, a Ni-Ti clamped-free rod in the superelastic range which is subjected to axial harmonic loading has been considered. Subsequently, the dynamic behavior of the superelastic rod has been analyzed using Auricchio's superelastic model, which can reproduce the superelastic behavior of the sample during stress induced phase transformation, and Finite Element Method. Obtained Results show that due to the phase transformation the dynamic behavior of superelastic rod is highly nonlinear. Also, it can be deduced that superelastic components with large hysteresis loop has the potential for use in vibration attenuation of structures.

引用

页码：164 / +

页数：2

共 50 条

[21] Influence of thermal annealing on the martensitic transitions in Ni-Ti shape memory alloys
Somsen, C
Zähres, H
Kästner, J
Wassermann, EF
Kakeshita, T
Saburi, T
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 273 : 310 - 314
[22] Effect of Ternary Addition of Cobalt on Shape Memory Characteristics of Ni-Ti Alloys
Santosh, S.
Sampath, V.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (06) : 1481 - 1484
[23] Mechanical Behaviour of Ausformed and Marformed Ti-rich Ni-Ti Shape Memory Alloys
Paula, A. S.
Mahesh, K. K.
Santos, C. M. L.
Fernandes, F. M. Braz
Viana, C. S. C.
ADVANCED MATERIALS FORUM IV, 2008, 587-588 : 635 - +
[24] DSC and microstructure analysis of high temperature Ni-Ti-Hf, low hysteresis Ni-Ti-Cu and conventional super-elastic and shape memory Ni-Ti alloy ingots and wires
Lemke, J. N.
Coda, A.
MATERIALS TODAY COMMUNICATIONS, 2019, 21
[25] A metallurgical characterization of ten endodontic Ni-Ti instruments: assessing the clinical relevance of shape memory and superelastic properties of Ni-Ti endodontic instruments
Zinelis, S.
Eliades, T.
Eliades, G.
INTERNATIONAL ENDODONTIC JOURNAL, 2010, 43 (02) : 125 - 134
[26] The optimization of annealing and cold-drawing in the manufacture of the Ni-Ti shape memory alloy ultra-thin wire
Lei, Xu
Rui, Wang
Yong, Liu
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 55 (9-12) : 905 - 910
[27] Micro-texture and residual stress evolution in shot peened superelastic Ni-Ti/Ni-Ti-Co shape memory alloys
Jena, Debasish
Dora, T. Rajesh Kumar
Vardhan, A. Vishnu
Srinivas, V.
Karthik, D.
Shukla, Pratik
Resapu, Rajeswara
Reddy, Y. Sriniketh
SURFACE & COATINGS TECHNOLOGY, 2024, 479
[28] GRADED TRANSITIONS IN Ni-Ti SHAPE MEMORY ALLOYS PROCESSED BY SEVERE PLASTIC DEFORMATION
Craciunescu, Corneliu M.
Fernandes, Francisco M. Braz
FUNCTIONAL MATERIALS LETTERS, 2012, 5 (04)
[29] Corrosion behaviour of a superelastic Ni-Ti alloy
Vandenkerckhove, R
Chandrasekaran, M
Vermaut, P
Portier, R
Delaey, L
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 378 (1-2): : 532 - 536
[30] Large tunable elastocaloric effect in additively manufactured Ni-Ti shape memory alloys
Cao, Yuxian
Zhou, Xianglin
Cong, Daoyong
Zheng, Hongxing
Cao, Yihuan
Nie, Zhihua
Chen, Zhen
Li, Shaohui
Xu, Ning
Gao, Zhiyong
Cai, Wei
Wang, Yandong
ACTA MATERIALIA, 2020, 194 : 178 - 189

← 1 2 3 4 5 →