Effects of N2, CO2 and H2O dilutions on temperature and concentration fields of OH in methane Bunsen flames by using PLIF thermometry and bi-directional PLIF

The effects of N-2, CO2 and H2O dilutions on the two-dimensional (2D) temperature and concentration fields of OH in methane Bunsen flames were investigated by employing two-line planar laser-induced fluorescence (PLIF) thermometry and bi-directional PLIF technique, respectively. The spatial resolution of the measured temperature and concentration fields of OH radical was 41.7 pin. It was found that the measured temperature fields in methane Bunsen flames with different diluents exhibited a nonuniform and a symmetrical structure. In terms of decreasing the flame temperature, the CO2 diluent achieved a good result compared with N-2 and H2O diluents. The total uncertainties in PLIF thermometry measurements were estimated to. be +/- 8.44%, +/- 8.17% and +/- 8.27% for each diluent, respectively. The OH peak absorption cross sections at different heights were obtained in methane Bunsen flames with different diluents. Finally, the 2D absolute OH concentration filed in methane Bunsen flames diluted with three different diluents were obtained by using bi-directional PLIF technique. The peak absolute OH number densities in the flames with H2O, N-2 and CO2 diluents were 9.84 x 10(17) cm(-3), 8.57 x 10(17) cm(-3) and 7.84 x 10(17) cm(-3), with the overall uncertainties of 20.56%, 19.04% and 23.43%, respectively. The numerical simulations of chemical kinetics were performed by using a physical model of one-dimensional laminar premixed flame and a detail methane reaction mechanism of GRI-Mech 3.0 so as to investigate the difference between the simulation results and experimental values. The comparison results for the temperature and OH concentration indicated that the reaction mechanism of GRI-Mech 3.0 might underestimate the chemical effects of CO2 and H2O diluents on the production of OH radical in premixed methane flames. (C) 2016 Elsevier Inc. All rights reserved.