Prediction on Crack Propagation of Concrete due to Time-Dependent Creep under High Sustained Loading

被引:15
作者
Li, Jie [1 ,2 ]
Dong, Wei [1 ]
Zhang, Binsheng [3 ]
Zhou, Xiangming [4 ]
机构
[1] Dalian Univ Technol, State Key Lab Coastal & Offshore Engn, Dalian 116024, Peoples R China
[2] Inner Mongolia Univ Technol, Sch Min Technol, Hohhot 010051, Peoples R China
[3] Glasgow Caledonian Univ, Sch Comp Engn & Built Environm, Dept Civil Engn & Environm Management, Glasgow G4 0BA, Lanark, Scotland
[4] Brunel Univ London, Dept Civil & Environm Engn, Civil Engn Design, Uxbridge UB8 3PH, Middx, England
基金
中国国家自然科学基金;
关键词
Concrete; Stress intensity factor; Crack propagation; Sustained loading; Stress relaxation; ROLLER-COMPACTED CONCRETE; QUASI-BRITTLE FRACTURE; DOUBLE-K CRITERION; MACRO-SYNTHETIC FIBER; MECHANICAL-PROPERTIES; EXTENSION RESISTANCE; MODEL; STRENGTH; LIFETIME; BEHAVIOR;
D O I
10.1061/(ASCE)MT.1943-5533.0004096
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
To investigate the effects of sustained loading on crack propagation of concrete, three-point bending tests were conducted on prenotched concrete beam specimens under 90% and 95% of the ultimate load until failure. The load versus crack mouth opening displacement (P-CMOD) curves and the failure age of the beam specimens were obtained from experiments. A numerical model was also proposed to investigate the crack propagation of concrete under sustained loading. The combination of the model with the Norton and cohesive stress relaxation models can reflect the viscoelastic property of uncracked concrete and its fracture process zone. Moreover, an initial fracture toughness-based criterion was proposed to determine the crack propagation under sustained loading. By calibrating the creep parameters of the Norton model and using necessary fracture parameters of concrete, the time-dependent crack propagation and failure time of concrete structures could be predicted. The numerical results indicated that for failure of the concrete specimens under high sustained loading, both the CMOD and crack growth rate first decreased and then increased during the sustained loading duration. There existed an inflection point on both the CMOD and crack growth rate versus time curves, which can be used to characterize the stability of concrete structures under sustained loading. Also, the crack propagation length corresponding to the inflection point was found to be approximately equal to that under static loading. (C) 2021 American Society of Civil Engineers.
引用
收藏
页数:13
相关论文
共 46 条
[1]  
*ACI, 1994, 209R92 ACI
[2]   Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen [J].
Aliha, M. R. M. ;
Razmi, A. ;
Mousavi, A. .
CONSTRUCTION AND BUILDING MATERIALS, 2018, 190 :612-622
[3]   Experimental determination of tensile strength and KIc of polymer concretes using semi-circular bend (SCB) specimens [J].
Aliha, M. R. M. ;
Heidan-Rarani, M. ;
Shokrieh, M. M. ;
Ayatollahi, M. R. .
STRUCTURAL ENGINEERING AND MECHANICS, 2012, 43 (06) :823-833
[4]  
[Anonymous], 2017, ENG SOLID MECH
[5]   A fractional order rate approach for modeling concrete structures subjected to creep and fracture [J].
Barpi, F ;
Valente, S .
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2004, 41 (9-10) :2607-2621
[6]   Creep and fracture in concrete: A fractional order rate approach [J].
Barpi, F. ;
Valente, S. .
Engineering Fracture Mechanics, 2002, 70 (05) :611-623
[7]   Lifetime of concrete dam models under constant loads [J].
Barpi, F ;
Ferrara, G ;
Imperato, L ;
Valente, S .
MATERIALS AND STRUCTURES, 1999, 32 (216) :103-111
[8]  
BAZANT ZP, 1995, MATER STRUCT, V28, P357
[9]  
BAZANT ZP, 1992, ACI MATER J, V89, P456
[10]  
Bazant ZP, 1997, J ENG MECH-ASCE, V123, P350