Impedance analysis of bio-fuel cell electrodes

To determine the criteria for the selection of an electrode suitable for a bio-fuel cell (BFC), five electrodes, i.e. silver, aluminum, nickel, stainless steel and carbon fiber cloth were investigated. The performance of the BFC according to the electrode material, including the generated voltage, current density and power density was observed. These results show that the materials used for constructing the electrodes affect the performance of the BFC. An impedance analysis was used to describe the characteristics of the electrodes in the solution. Equivalent circuits of each component such as solution, electrodes-solution interface and electrode were determined from the impedance data. The constant-phase element (CPE) model was applied for data analyzing. It was found that stainless steel, nickel and aluminum behaved like a polarized electrode which has a high electrode-solution interfacial impedance, while carbon fiber cloth and silver had a low impedance like a non-polarized electrode. The impedance data indicated that a higher interfacial impedance will result in a higher loading effect. The results can be summarized that the carbon fiber cloth electrode offers a good electron transfer in the system and thus supplies higher power to the external load. (c) 2007 Elsevier B.V. All rights reserved.