A Study on Jig Using Microstrip Line for the S-Parameter Method

被引：0

作者：

Endo, Kazuma ^{[1
]}

Sasamori, Takayuki ^{[1
]}

Tobana, Teruo ^{[1
]}

Isota, Yoji ^{[1
]}

机构：

[1] Akita Prefectural Univ, Fac Syst Sci & Technol, 84-4 Tsuchiya Ebinokuchi, Yurihonjo, Akita, Japan

来源：

2015 IEEE CONFERENCE ON ANTENNA MEASUREMENTS & APPLICATIONS (CAMA) | 2015年

关键词：

S-parameter method; balanced fed antenna; input impedance; modified open correction; measurement jig; microstrip line; ANTENNAS;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Recently, the S-parameter method using a vector network analyzer and a measurement jig instead of a balun was proposed whereby the differential input impedance of a balanced-fed antenna were obtained. As no balun is used, measuring impedance over a wide frequency bandwidth is now possible. To improve the measurement accuracy of the S-parameter method, the dependence on direction of SMA connectors of the measurement jig is obtained from the results of calculations using the FDTD method. Two types of jigs installed the connectors vertically or horizontally are modeled, and the input impedance of the dipole antenna is calculated using the S-parameter method. The input impedances are compared with those obtained from the available theories by King. Results from the S-parameter method roughly agree with the available theories by King, and the influence of direction of the connector is relatively small.

引用

页数：4

共 50 条

[21] Fast S-parameter extraction method for the analysis of planar structures using the method of moments
Van Thielen, BLA
Vandenbosch, GAE
INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, 2001, 11 (06) : 404 - 415
[22] MICROSTRIP LINE PARAMETER DETERMINATION BY THE ITERATION METHOD
NOVIKOV, YN
CHEPURNOV, AV
RADIOTEKHNIKA I ELEKTRONIKA, 1986, 31 (05): : 872 - 876
[23] A leaky-mode S-parameter extraction technique for efficient design of the microstrip line leaky-wave antenna
Sheen, JW
Lin, YD
Chen, TL
1999 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS 1-4, 1999, : 175 - 178
[24] Evaluation of coplanar waveguide-to-microstrip transitions for precision s-parameter measurements
O'Neil, Benton K.
Young, Jeffery L.
MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2008, 50 (10) : 2667 - 2671
[25] Accurate and complete frequency dependent transmission line characterization using S-parameter measurements
Winkel, Thomas-Michael
Dutta, Lohit Sagar
IEEE Topical Meeting on Electrical Performance of Electronic Packaging, 1999, : 133 - 136
[26] S-parameter broadband measurements of microstrip lines and extraction of the substrate intrinsic properties
Hinojosa, J
Faucon, L
Queffelec, P
Huret, F
MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2001, 30 (01) : 65 - 69
[27] A study of underlayer geometry effects on interconnect line characteristics through S-parameter measurements
Wee, JK
Kim, YH
Kim, YJ
Lee, PS
Jeon, YJ
Kim, JH
Yoon, HS
Chung, JY
51ST ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, 2001, : 1290 - 1294
[28] S-parameter analysis of multislot microstrip patch arrays: Spectral domain approach
Gianola, P
Finotto, D
Ansbro, AP
IEE PROCEEDINGS-MICROWAVES ANTENNAS AND PROPAGATION, 1996, 143 (05) : 430 - 436
[29] ON THE RENORMALIZATION OF THE S-PARAMETER
AOKI, S
PHYSICS LETTERS B, 1992, 291 (04) : 437 - 440
[30] Micromagnetic method of s-parameter characterization of magnonic devices
Dvornik, M.
Kuchko, A. N.
Kruglyak, V. V.
JOURNAL OF APPLIED PHYSICS, 2011, 109 (07)

← 1 2 3 4 5 →