Morphological study of friction stir processed aluminium metal matrix composites

被引：1
|
作者：
Marini, C. D. [1 ]
Fatchurrohman, Nanang [1 ]
Zulkfli, Zuhairah [1 ]
机构：
[1] Univ Malaysia Pahang, Fac Mfg & Mechatron Engn Technol, Pekan 26600, Malaysia
来源：
MATERIALS TODAY-PROCEEDINGS | 2021年 / 46卷
关键词：
Friction stir processing; Al metal matrix composites; Surface composites; Morphological study; Wear performance; WEAR CHARACTERIZATION; MICROSTRUCTURE; BEHAVIOR; ALLOY; PARTICLES;
D O I：
10.1016/j.matpr.2020.07.569
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper demonstrates the morphological study of friction stir processed (FSPed) aluminium metal matrix composites. Friction stir processing was implemented during fabrication process to produce metal matrix composites (MMC). The MMC consisted of aluminium alloy AA6061 and rice husk ash (RHA) particles. The morphological study compared the wear performance of as-received AA6061, FSPed AA6061 and FSPed AA6061/6 vol% RHA. The result showed that the FSPed AA6061/6 vol% RHA had the best wear performance among the other specimens. This was specified by less delamination, smoother worn surface and shallower grooves on this FSPed composite compared on the alloy material as presented in the scanning electron microscopy (SEM) morphological study. (c) 2020 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the Innovative Manufacturing, Mechatronics & Materials Forum 2020.
引用
收藏
页码：1745 / 1748
页数：4
相关论文
共 50 条
  • [1] Investigation of wear performance of friction stir processed aluminium metal matrix composites
    Marini, C. D.
    Fatchurrohman, Nanang
    Zulkfli, Zuhairah
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 1740 - 1744
  • [2] Magnesium based surface metal matrix composites by friction stir processing
    Sunil, B. Ratna
    Reddy, G. Pradeep Kumar
    Patle, Hemendra
    Dumpala, Ravikumar
    JOURNAL OF MAGNESIUM AND ALLOYS, 2016, 4 (01) : 52 - 61
  • [3] A survey on reinforcements used in friction stir processing of aluminium metal matrix and hybrid composites
    Ikumapayi, Omolayo M.
    Akinlabi, Esther T.
    Pal, Surjya K.
    Majumdar, Jyotsna D.
    2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2019), 2019, 35 : 935 - 940
  • [4] A Study of Vibration and Wear Resistance of Friction Stir Processed Metal Matrix Composite
    Sharma, Harsh
    Kumar, Kaushal
    Kumar, Rajeev
    Gulati, Piyush
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (14) : 28354 - 28363
  • [5] Investigation on friction stir welding parameters of Aluminium metal matrix composites
    Sucharitha M.
    Ravisankar B.
    International Journal of Vehicle Structures and Systems, 2019, 11 (02) : 231 - 233
  • [6] Effect of heat treatments on friction stir processed aluminium surface composites
    Girish, G.
    Anandakrishnan, V.
    MATERIALS SCIENCE AND TECHNOLOGY, 2022, 38 (05) : 318 - 328
  • [7] On the High-Temperature Flow Response of Friction Stir Processed Magnesium Metal Matrix Composites
    Hosseinzadeh, Ali
    Yapici, Guney Guven
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2021, 143 (01):
  • [8] Damping capacity of friction stir processed commercial pure aluminium metal
    Reddy, K. Venkateswara
    Naik, R. Bheekya
    Reddy, G. Madhusudhan
    Kumar, R. Arockia
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 2061 - 2065
  • [9] Effect of Friction stir processing parameters on microstructure and microhardness of aluminium based Metal matrix composites
    Parikh, V. K.
    Badgujar, A. D.
    Ghetiya, N. D.
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 7455 - 7460
  • [10] Friction stir welding of Aluminium matrix composites - A Review
    Subramanya, Prabhu
    Amar, Murthy
    Arun, Shettigar
    Mervin, Herbert
    Shrikantha, Rao
    INTERNATIONAL CONFERENCE ON RESEARCH IN MECHANICAL ENGINEERING SCIENCES (RIMES 2017), 2018, 144
12345