Fatigue Property in Ni-Based Bulk Metallic Glass

被引：2

作者：

Fujita, Kazutaka ^{[1
]}

Misumi, Kousuke ^{[1
]}

Zhang, Wei ^{[2
]}

Inoue, Akihisa

机构：

[1] Ube Natl Coll Technol, Dept Mech Engn, Ube, Yamaguchi 7558555, Japan

[2] Tohoku Univ, Inst Mat Res, Sendai, Miyagi 9808577, Japan

来源：

JOURNAL OF THE JAPAN INSTITUTE OF METALS | 2011年 / 75卷 / 09期

关键词：

fatigue; fatigue limit; bulk metallic glass; amorphous; fractography; FRACTURE-TOUGHNESS; STRENGTH; ALLOYS; AL;

D O I：

10.2320/jinstmet.75.474

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Fatigue test was carried out on Ni-based bulk metallic glass (BMG) for which there is still no reports on fatigue strength. Test alloy rods with a diameter of 2 mm were prepared in Ni60Zr20Nb15Al5 at% systems by copper mold casting method. The tensile strength (sigma(B)) was 2.9 GPa. The test specimens were machined to hourglass shape type with a minimum diameter of 0.9 mm. The specimens were tested at a stress ratio of 0.1 and a frequency of 10 Hz. The fatigue limit (sigma(W)) and fatigue ratio (sigma(W)/sigma(B)) in the Ni-based BMG showed high values of 1.68 GPa and 0.58, respectively. The tendency that the sigma(W) increased with increasing the sigma(B) in BMGs was indicated in the Ni-based BMG. In addition, the fatigue fracture toughness in the Ni-based BMG showed a high value of 14 MPa.m(1/2).

引用

页码：474 / 478

页数：5

共 50 条

[41] Study of mechanical property and crystallization of a ZrCoAl bulk metallic glass
Tan, J.
Zhang, Y.
Stoica, M.
Kuehn, U.
Mattern, N.
Pan, F. S.
Eckert, J.
INTERMETALLICS, 2011, 19 (04) : 567 - 571
[42] Studies on Stress Corrosion Cracking of Vit 105 Bulk Metallic Glass
Gebert, Annett
Geissler, David
Pilz, Stefan
Uhlemann, Margitta
Davani, Farnaz A.
Hilke, Sven
Roesner, Harald
Wilde, Gerhard
FRONTIERS IN MATERIALS, 2020, 7 (07):
[43] Comments on "The fatigue-endurance limit of a Zr-based bulk metallic glass"
Wang, G. Y.
Landes, J. D.
Peker, A.
Liaw, P. K.
SCRIPTA MATERIALIA, 2007, 57 (01) : 65 - 68
[44] Experimental and Statistical Analysis of Fatigue Behavior in Zr-based Bulk Metallic Glass
Yao, Zhifeng
Qiao, Jichao
Jean-Marc, Pelletier
Yao, Yao
RARE METAL MATERIALS AND ENGINEERING, 2024, 53 (11) : 3010 - 3016
[45] Effect of shot peening on the fatigue life of a Zr-based bulk metallic glass
Raghavan, R.
Ayer, R.
Jin, H. W.
Marzinsky, C. N.
Ramamurty, U.
SCRIPTA MATERIALIA, 2008, 59 (02) : 167 - 170
[46] A Ni-free ZrCuFeAlAg bulk metallic glass with potential for biomedical applications
Liu, Yan
Wang, Yi-Mei
Pang, Hui-Fang
Zhao, Qiu
Liu, Lin
ACTA BIOMATERIALIA, 2013, 9 (06) : 7043 - 7053
[47] Bulk metallic glass formation in the (Ti,Zr)-(Ni,Cu)-S system
Gross, Oliver
Ruschel, Lucas
Kuball, Alexander
Bochtler, Benedikt
Adam, Bastian
Busch, Ralf
JOURNAL OF PHYSICS-CONDENSED MATTER, 2020, 32 (26)
[48] Fractography of fatigue crack propagation in a nanocrystalline Zr-based bulk metallic glass
Fujita, K
Inoue, A
Zhang, A
SCRIPTA MATERIALIA, 2001, 44 (8-9) : 1629 - 1633
[49] Fatigue of Zr-based Bulk Metallic Glass under Cyclic-torsion
Nakai, Y.
Nakagawa, K.
Mikami, K.
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10
[50] Four-point-bending-fatigue behavior of the Zr-based Vitreloy 105 bulk metallic glass
Morrison, M. L.
Buchanan, R. A.
Liaw, P. K.
Green, B. A.
Wang, G. Y.
Liu, C.
Horton, J. A.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 467 (1-2): : 190 - 197

← 1 2 3 4 5 →