Fatigue Property in Ni-Based Bulk Metallic Glass

被引:2
|
作者
Fujita, Kazutaka [1 ]
Misumi, Kousuke [1 ]
Zhang, Wei [2 ]
Inoue, Akihisa
机构
[1] Ube Natl Coll Technol, Dept Mech Engn, Ube, Yamaguchi 7558555, Japan
[2] Tohoku Univ, Inst Mat Res, Sendai, Miyagi 9808577, Japan
关键词
fatigue; fatigue limit; bulk metallic glass; amorphous; fractography; FRACTURE-TOUGHNESS; STRENGTH; ALLOYS; AL;
D O I
10.2320/jinstmet.75.474
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Fatigue test was carried out on Ni-based bulk metallic glass (BMG) for which there is still no reports on fatigue strength. Test alloy rods with a diameter of 2 mm were prepared in Ni60Zr20Nb15Al5 at% systems by copper mold casting method. The tensile strength (sigma(B)) was 2.9 GPa. The test specimens were machined to hourglass shape type with a minimum diameter of 0.9 mm. The specimens were tested at a stress ratio of 0.1 and a frequency of 10 Hz. The fatigue limit (sigma(W)) and fatigue ratio (sigma(W)/sigma(B)) in the Ni-based BMG showed high values of 1.68 GPa and 0.58, respectively. The tendency that the sigma(W) increased with increasing the sigma(B) in BMGs was indicated in the Ni-based BMG. In addition, the fatigue fracture toughness in the Ni-based BMG showed a high value of 14 MPa.m(1/2).
引用
收藏
页码:474 / 478
页数:5
相关论文
共 50 条
  • [31] Fatigue crack propagation in a nanocrystalline Zr-based bulk metallic glass
    Fujita, K
    Inoue, A
    Zhang, T
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2000, 64 (09) : 787 - 792
  • [32] Fatigue and Fracture Behavior of a Ca-Based Bulk-Metallic Glass
    Raphael, J.
    Wang, G. Y.
    Liaw, P. K.
    Senkov, O. N.
    Miracle, D. B.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (07): : 1775 - 1779
  • [33] Fatigue crack propagation in a nanocrystalline Zr-based bulk metallic glass
    Fujita, K
    Inoue, A
    Zhang, T
    MATERIALS TRANSACTIONS JIM, 2000, 41 (11): : 1448 - 1453
  • [34] Improving fatigue property of Zr-Ni-Al metallic glass by tailoring chemical composition with high structure stability
    Song, Zhen-Qiang
    Kawaguchi, Takehiro
    Dong, Chuang
    Wang, Li-Min
    Zhu, Shijie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 882
  • [35] Wear resistivity of super-precision microgear made of Ni-based metallic glass
    Ishida, Mamoru
    Takeda, Hideki
    Nishiyama, Nobuyuki
    Kita, Kazuhiko
    Shimizu, Yukiharu
    Saotome, Yasunori
    Inoue, Akihisa
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 : 149 - 154
  • [36] Memory phenomenon in a lanthanum based bulk metallic glass
    Zhou, Ye
    Huang, Wei Min
    Zhao, Yong
    Ding, Zhen
    Li, Yan
    Tor, Shu Beng
    Liu, Erjia
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 672 : 131 - 136
  • [37] Formation and thermal stability of Ni-based bulk metallic glasses in Ni-Zr-Nb-Al system
    Qiang, J. B.
    Zhang, W.
    Inoue, A.
    MATERIALS TRANSACTIONS, 2007, 48 (09) : 2385 - 2389
  • [38] Fatigue crack initiation and small-crack propagation in Zr-based bulk metallic glass
    Nakai, Yoshikazu
    Hosomi, Shohei
    MATERIALS TRANSACTIONS, 2007, 48 (07) : 1770 - 1773
  • [39] Bending behavior of TiZrNiCuBe bulk metallic glass
    Huang, Yongjiang
    Wang, Dongjun
    Wang, Dapeng
    Zhang, Zhixiong
    Shen, Jun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 541 : 359 - 364
  • [40] A Ni-free high-zirconium-based bulk metallic glass with enhanced plasticity and biocompatibility
    Hua, Nengbin
    Huang, Lu
    He, Wei
    Pang, Shujie
    Zhang, Tao
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2013, 376 : 133 - 138