Fatigue Property in Ni-Based Bulk Metallic Glass

被引：2
|
作者：
Fujita, Kazutaka [1 ]
Misumi, Kousuke [1 ]
Zhang, Wei [2 ]
Inoue, Akihisa
机构：
[1] Ube Natl Coll Technol, Dept Mech Engn, Ube, Yamaguchi 7558555, Japan
[2] Tohoku Univ, Inst Mat Res, Sendai, Miyagi 9808577, Japan
来源：
JOURNAL OF THE JAPAN INSTITUTE OF METALS | 2011年 / 75卷 / 09期
关键词：
fatigue; fatigue limit; bulk metallic glass; amorphous; fractography; FRACTURE-TOUGHNESS; STRENGTH; ALLOYS; AL;
D O I：
10.2320/jinstmet.75.474
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Fatigue test was carried out on Ni-based bulk metallic glass (BMG) for which there is still no reports on fatigue strength. Test alloy rods with a diameter of 2 mm were prepared in Ni60Zr20Nb15Al5 at% systems by copper mold casting method. The tensile strength (sigma(B)) was 2.9 GPa. The test specimens were machined to hourglass shape type with a minimum diameter of 0.9 mm. The specimens were tested at a stress ratio of 0.1 and a frequency of 10 Hz. The fatigue limit (sigma(W)) and fatigue ratio (sigma(W)/sigma(B)) in the Ni-based BMG showed high values of 1.68 GPa and 0.58, respectively. The tendency that the sigma(W) increased with increasing the sigma(B) in BMGs was indicated in the Ni-based BMG. In addition, the fatigue fracture toughness in the Ni-based BMG showed a high value of 14 MPa.m(1/2).
引用
收藏
页码：474 / 478
页数：5
相关论文
共 50 条
  • [21] Corrosion-fatigue studies of the Zr-based Vitreloy 105 bulk metallic glass
    Morrison, M. L.
    Buchanan, R. A.
    Liaw, P. K.
    Green, B. A.
    Wang, G. Y.
    Liu, C. T.
    Horton, J. A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 467 (1-2): : 198 - 206
  • [22] Effect of crystallization on the surface area of porous Ni-based metallic glass foams
    Kim, J. S.
    Lee, M. H.
    Yi, S.
    Sordelet, Daniel J.
    Kuehn, U.
    Eckert, J.
    PHILOSOPHICAL MAGAZINE LETTERS, 2011, 91 (09) : 582 - 590
  • [23] Mechanisms for fracture and fatigue-crack propagation in a bulk metallic glass
    C. J. Gilbert
    V. Schroeder
    R. O. Ritchie
    Metallurgical and Materials Transactions A, 1999, 30 : 1739 - 1753
  • [24] Corrosion fatigue behavior of a Mg-based bulk metallic glass in a simulated physiological environment
    Li, Haifei
    Liu, Ying
    Pang, Shujie
    Liaw, Peter K.
    Zhang, Tao
    INTERMETALLICS, 2016, 73 : 31 - 39
  • [25] Influence of isothermal annealing on the micro-hardness and friction property in CuZrAl bulk metallic glass
    Tao, Pingjun
    Yang, Yuanzheng
    Bai, Xiaojun
    Wen, Jianguo
    Ru, Qiang
    ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 615 - +
  • [26] Fatigue damage in bulk metallic glass II: Experiments
    Hess, PA
    Menzel, BC
    Dauskardt, RH
    SCRIPTA MATERIALIA, 2006, 54 (03) : 355 - 361
  • [27] Fatigue damage in bulk metallic glass I: Simulation
    Cameron, KK
    Dauskardt, RH
    SCRIPTA MATERIALIA, 2006, 54 (03) : 349 - 353
  • [28] IMPORTANCE OF INHOMOGENEITY ON FATIGUE STRENGTH OF BULK METALLIC GLASS
    Nakai, Y.
    FATIGUE OF MATERIALS: ADVANCES AND EMERGENCES IN UNDERSTANDING, 2010, : 395 - 409
  • [29] Metallic glass fiber-reinforced Zr-based bulk metallic glass
    Deng, S. T.
    Diao, H.
    Chen, Y. L.
    Yan, C.
    Zhang, H. F.
    Wang, A. M.
    Hu, Z. Q.
    SCRIPTA MATERIALIA, 2011, 64 (01) : 85 - 88
  • [30] Fatigue and corrosion of a Pd-based bulk metallic glass in various environments
    Watanabe, L. Y.
    Roberts, S. N.
    Baca, N.
    Wiest, A.
    Garrett, S. J.
    Conner, R. D.
    MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2013, 33 (07): : 4021 - 4025
12345